ANSWERED Falcon board not glitching

[cj_goalie31]

Hi recently bought an elite console with a falcon dvd drive. I have performed RGH on another falcon console without problems. I get solid red LED on coolrunner and blinking green light on led i used multibuilder to buil .ecc and read my nand using jtag tool. I'm sorry but i dont have a good enough camera to get good quality photos.

Any help would be appreciated.

 

[hodgie]

are you certain you programmed the coolrunner correctly?
how have you layed out your wires? do they they follow the pics posted here by Uber?

 

[cj_goalie31]

yes i followed all the tutorials and ive done a falcon board before

i flashed the glitch board using jtag tool

---------- Post added at 22:08 ---------- Previous post was at 22:07 ----------

i just noticed that if i pick the board up while its trying to glitch the green light blinks way faster

 

[hodgie]

you should really try to get some pics posted. if the green light is blinking, and you have prog'd it correctly, and your soldering is truely good, then it sounds like an issue with wire placement

pics though!

 

[cj_goalie31]

kk ill try but it might not be very good you probably wont see the solder joints

 

[hodgie]

maybe try moving the wires.

 

[cj_goalie31]

sorry these are the only ones acceptable and theres another good one but im not allowed to upload it the file is to big

 

[cj_goalie31]

ohp i looked over my board and my green wire was bridged i redid the solder and booted into xell

 

[dirtyscout]

check the yellow to it looks off to the side alittle

 

[Martin C]

ohp i looked over my board and my green wire was bridged i redid the solder and booted into xell

If you ever wonder why we ask for pics, this is the main reason.

It's almost ALWAYS soldering. Please don't post again regarding RGH issues without having pics ready - I have a sticky called "pics" right in this very section which says exactly this, which I'm guessing you're either ignoring or choosing not to read.

It's a waste of time and bandwidth - especially yours.