Falcon Boots to xell but not dashboard

C

chappersjohn

Full Member
Aug 2, 2011
31
0
in my own little dream world
my falcon will boot to xell usually in 1 to 2 cycles but will not boot to dash

got my cpu key.

i am using the r-tag method

i am on dash 16203

when i write my stock images it just rrod's now
 
Last edited:
C

chappersjohn

Full Member
Aug 2, 2011
31
0
in my own little dream world
Console Type: Falcon
NAND size: 16
Dashboard version: 2.0.16203
CB version: 5774
Screenshot of NAND details from J-Runner:
(attach an image to your post)


J-Runner log:

Code: 
---------------------------------------------------------------
C:\Users\Brian\Desktop\J-Runner v02 Beta (290) Core Pack\101096483905\updflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.16203.0
Console   : Falcon
NAND size : 16MiB
Build     : JTAG
Xell      : power on console with console eject button
Serial    : 
ConsoleId :
MoboSerial: 
Mfg Date  : 09/20/2008
CPU Key   :  i dont think so
1BL Key   :  i dont think so
DVD Key   : i dont think so
CF LDV    : 16
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Yourname\Desktop\J-Runner v02 Beta (290) Core Pack\101096483905
Image is Ready
Version: 10
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 3:38 min:sec


POST output from J-Runner (either POST_OUT monitor or RATER output):

Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post F7 
Post F6 
Post F4 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post E0 
Post C0 
Post 80 
Post DF 
Post 9F - Panic - VERIFY_SECOTP_5 
Post 9B - Panic - VERIFY_SECOTP_1 
Post 99 
Post 19 - HMACSHA_COMPUTE 
Post 09 
Post 01 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 39 - SHA_VERIFY_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 49 - SHA_VERIFY 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 5A - INIT_XEX_TRAINING 
Post 61 - INIT_HAL_PHASE_0 
Post 62 - INIT_PROCESS_OBJECTS 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 47 - RC4_DECRYPT 
Post 4B - LZX_EXPAND 
Post 4D - DECODE_FUSES 
Post 51 - LOAD_UPDATE_2 
Post 52 - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 64 - INIT_MEMORY_MANAGER 
Post 6A - INIT_HAL_PHASE_1 
Post 6C - INIT_SECURITY 
Post 6F - INIT_POWER_MODE 
Shutdown
Power Up
Waiting for POST to change
Post 08 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post F8 
Post 78 - INIT_STFS_DRIVER 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 5A - INIT_XEX_TRAINING 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 11 - FSB_CONFIG_PHY_CONTROL 


cycles to glitch 1,1


Overall: 2 / 2
Average: 1.00
Median: 1
Score: 10.00


Cycle 1 - 100.00%


100% within 1 Cycles
 
Last edited by a moderator:
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
chappersjohn said:
as i can boot into xell would a manual update thought that be able to get the dash to boot with the new 16573 dash
Click to expand...
Post the log for updflash.bin and also some images of the install please.

What is the secondary error code when you try and boot the console with the stock NAND image written?
 
Last edited:
You must log in or register to reply here.