Falcon CR4 XL wont glitch

M

mmz16x

Junior Member
Dec 15, 2006
23
0
SK
Console Type: Falcon
NAND size: 16
Dashboard version: 17349
CB version: 5774
Description of problem: glitch wont boot
Was the console working before you started: Yes

the issue im having is that when i have point B soldered ive done top/bottom points the Debug light stays on very dim though and wont glitch im doing the R-JTAG mod I had tried RGH2+ but it would never glitch :( any idea's are much appreciated and my soldering is fine no bridges or glops etc...

also i have R-JTAG/AUD_CLAMP checked in Jrunner too
 
Nintendo

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
mmz16x said:
i will post pics now and dip 7 is done and im not using any QSB's as im following this tutorial to a T

http://team-xecuter.com/forums/threads/148878-CR4-R-Jtag-Install-Diagram-(Wires-Only)

pics

http://s224.photobucket.com/user/mmz16x/slideshow/Mobile Uploads
Click to expand...
First of all, clean that dust, you'll be doing yourself a favor. I see some oxidized solder at Post Out. I'd trim the wires as short as possible. Would you mind to share the J-Runner log? I see you are using AUD_Clamp, have you tried with another method?
 
M

mmz16x

Junior Member
Dec 15, 2006
23
0
SK
i dont mind and yes i tried RGH2+ but it glitched forever and never got to xell but this dim green light issue didnt happen until I tried R-JTAG

here it is
Monday, September 21, 2015 12:56:13 PM


J-Runner v0.3 Beta (7) Started






Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Glitch2 Selected
CR4 Selected
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving smc_config.bin
Finished


===================================================
Monday, September 21, 2015 1:38:06 PM


J-Runner v0.3 Beta (7) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished


===================================================
Monday, September 21, 2015 1:38:32 PM


J-Runner v0.3 Beta (7) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files


===================================================
Monday, September 21, 2015 2:13:55 PM


J-Runner v0.3 Beta (7) Started




It's advised to run in administrator mode on Windows 8


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Glitch2 Selected
CR4 Selected
Version: 03
Flash Config: 0x01198010
Writing Nand
nanddump1.bin
Done!
in 1:51 min:sec


Falcon Manually Selected
ECC created
Version: 03
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:09 min:sec
 
M

mmz16x

Junior Member
Dec 15, 2006
23
0
SK
its connected to FT2R2 the alt point for R4B24 I have soldered to both points and when that point alone is soldered and xbox plugged in i get a green dim light on CR4 when xbox is plugged into power and not turned on if unsoldered from either point no dim green light when xbox off and power plug plugged in

P.S. if i turn xbox on while green dim light present i get super fast glitchs and no glitch success
 
Last edited:
M

mmz16x

Junior Member
Dec 15, 2006
23
0
SK
Ive put the system back to RGH2+ and still no xell been trying for hours so... I was wondering do I need the cpukey to edit the SMC_CONFIG as I cant yet get the falcon I have been working on to glitch to xell I feel like this is a stupid Q tho as I assume cpukey is prolly needed for this correct me if im wrong
 
You must log in or register to reply here.