R-JTAG Falcon dosen't start.

[wababc]

Console Type: (Falcon)
NAND size: 16
Dashboard version: 2.0.15774
CB version: e.g 5774
Screenshot of NAND details from J-Runner:
I don't have a camera so i linked this two youtube video i made of the soldring
http://www.youtube.com/watch?v=ZGNU8MGcfXM&feature=youtu.be
http://www.youtube.com/watch?v=vzaAOfh5LCQ&feature=youtu.be
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 10 - Payload/1BL started
Post 10 - Payload/1BL started
Post 30 - VERIFY_OFFSET_4BL_CD
Post 10 - Payload/1BL started
Post 10 - Payload/1BL started
Post 30 - VERIFY_OFFSET_4BL_CD
Post 10 - Payload/1BL started
Post 10 - Payload/1BL started
Post 30 - VERIFY_OFFSET_4BL_CD
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 10 - Payload/1BL started
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 10 - Payload/1BL started
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post FE
Post FC
Post FC
Post FC
Post FC
Post FD
Post FC
Post FC
Post FD
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post FC
Post FC
Post FC
Post FC
Post FC
Post FD
Post FD
Post FC
Post F8
Post FC
Post FE
Shutdown


Description of problem:
My falcon dosent boot.
i made every thing as montioned in the tutorial.

Was the console working before you started: Y


thanks for the help

 

[Utmad]

You really need to get some flux on those connections and touch them all up

 

[BrockThunderjam]

Did you try all voltage settings and all dip settings? And totally agree about the flux, joints look cold.

Also when you say it doesn't boot what do you mean? You have rather output which indicates it powers on. Is debug blinking? Can you provide your jrunner log as well?


Sent from my iPhone using Tapatalk - now Free

 

[DarkThirty]

dunno if this is the reason or if itll help but read here http://team-xecuter.com/forums/showthread.php?t=140377
or use the alt cpu_rst point on the topside of the board R8C2

 

[wababc]

i tried to put no-CLEAN FLUX on each point and soldered back and i tried to start the box again but nothing changed
i tried all dip point and combination but not successful
this is the log from Jrunner

Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 7F 
Post 7B 
Post 79 - LOAD_XAM 
Post 71 - INIT_AUDIO_DRIVER 
Post 51 - LOAD_UPDATE_2 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 10 - Payload/1BL started 
Post 40 - Entrypoint of CD reached 
Post 41 - VERIFY_OFFSET 
Post F1 - Panic - VERIFY_HEADER_CB_B 
Post 01 
Post F1 - Panic - VERIFY_HEADER_CB_B 
Post 01 
Post F1 - Panic - VERIFY_HEADER_CB_B 
Post 01 
Post F1 - Panic - VERIFY_HEADER_CB_B 
Post 01 
Post F1 - Panic - VERIFY_HEADER_CB_B 
Post 71 - INIT_AUDIO_DRIVER 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post FC 
Post FD 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post FC 
Post DF 
Post 8F - Panic - MAINTENANCE 
Post FC 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Most Fails(cumulative): 0xA0
Shutdown

i flashed back the original nand and it start the box correctly but not with the hack one
what should i do ?