So i flashed my falcon board got the cpu key, created freeboot image, can boot to xell via eject key but when i try to boot to dash using normal power button i get error 49 any ideas?
Falcon flashed E49
- Thread starter djob1981
- Start date
As far as i know freeboot is for jtag and u cent jtag cb5771 is grh soooooo u get my piont
---------- Post added at 10:21 ---------- Previous post was at 10:13 ----------
Its cab be 2 things or u jtagged ujtagble cb or u used freebot on rgh both of them is wrong way
---------- Post added at 10:21 ---------- Previous post was at 10:13 ----------
Its cab be 2 things or u jtagged ujtagble cb or u used freebot on rgh both of them is wrong way
Martin C
VIP Member
I'll ignore that post as it's gibberish at best.
Boot to Xell, put xenon.elf from rawflash v4 onto a usb stick with your nandflash.bin file. Let it update the console this way instead.
Boot to Xell, put xenon.elf from rawflash v4 onto a usb stick with your nandflash.bin file. Let it update the console this way instead.
i have created an image with multibuilder v0.7 but thats makes my xbox not even turn on, did an image with jtagtool and oput it to usb with xenon.elf. booted to xell and let xell install the file. when i turn on my xbox now i get the christmas tree lights then E49, i have tried a few rf boards wich work on other xbox 360's, this should indicate a problem with the southbridge? but it is fine when i boot to xell
Martin C
VIP Member
As long as your LDVs match, take your original NAND dump and run it through Multi_Builder 0.7. Paste the nandflash.log file that gets created.
If you can't get multi_builder to make you a valid flash file, you're either doing something seriously wrong or there's a big issue with your original dump.
Could i use a nanddump from a working falcon board and then patch it with the cpu key from the xbox that has the e49 issue?
The error has just changed from E49 to E79 now? hmm
The error has just changed from E49 to E79 now? hmm
Martin C
VIP Member
Just flashed the orig nand back to the xbox and am getting the 2 red and 2 green lights alternating
Martin C
VIP Member
ok - open the original NAND in 360 Flash Dump Tool and put your CPU key into Settings/Keys. You should be able to view the details on the right.
i have another falcon that i could dump the nand and then could i import my smc,kv,andcpu key into it and flash it back to the non working xbox?
Martin C
VIP Member
You need to stop.
Tell me EVERYTHING about this console, as your OP doesn't indicate any reason why you would need to be messing with donor NANDs. I hate being drip-fed information as it's a waste of everyone's time.
Tell me EVERYTHING about this console, as your OP doesn't indicate any reason why you would need to be messing with donor NANDs. I hate being drip-fed information as it's a waste of everyone's time.
Martin C
VIP Member
Got this from a customer who said it was faulty and they had tried to fix it so didnt come with any heatsinks so i dumped the nad, then poped on the xecuter rrod kit and started the whole process never checked if it booted to dash my fault really but im guessing that it had a bad nand flash in the first place?
Any ideas
---------- Post added at 03:35 ---------- Previous post was at 03:27 ----------
yes
Any ideas
---------- Post added at 03:35 ---------- Previous post was at 03:27 ----------
yes
Martin C
VIP Member
ok, so now we have a history. Do you not think this was worth mentioning at the start?
You need a donor NAND with a CPU key.
You then need to re-encrypt the donor nand with THIS console's CPU key.
You need a donor NAND with a CPU key.
You then need to re-encrypt the donor nand with THIS console's CPU key.
Sorry martin, this is my 1st rgh.
I have a donar nand from a falcon board do i need the donor cpu key or am i ok with just the donor nand and my copu key from the broken xbox
Martin C
VIP Member
If the NAND image you have shown on 360 Flash Dump Tool is valid (which it looks like it is) and is being decrypted with the console's CPU key, run it through Multi_Builder and use it to make a retail image. Then use this image to make an RGH one.
The nand in the image is the orig nand with the orig cpu key fron the e49 console, I am going to dump the nand from the working falcon i have and get the cpu key and then build the image with the e49 consoles cpu key? is that right?