Falcon Freezes at Splash

A

akatimshady

Noob Account
Dec 1, 2011
5
0
Console Type: Falcon
NAND size: 16 (All falcons are 16 right???)
Dashboard version: 2.0.16537
CB version: 5774
Screenshot of NAND details from J-Runner:
jrnandinfo.jpg
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 21 - INIT_SECOTP
Post 6D - INIT_KEY_EX_VAULT
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 41 - VERIFY_OFFSET
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 50 - LOAD_UPDATE_1
Post 52 - BRANCH
Post 58 - INIT_HYPERVISOR
Post 59 - INIT_SOC_MMIO
Post 5A - INIT_XEX_TRAINING
Post 61 - INIT_HAL_PHASE_0
Post 63 - INIT_KERNEL_DEBUGGER
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6B - INIT_SFC_DRIVER
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4D - DECODE_FUSES
Post 51 - LOAD_UPDATE_2
Post 52 - BRANCH
Post 59 - INIT_SOC_MMIO
Post 5A - INIT_XEX_TRAINING
Post 5B - INIT_KEYRING
Post 5C - INIT_KEYS
Post 5F
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 69 - INIT_KEY_VAULT
Post 6C - INIT_SECURITY
Post 6D - INIT_KEY_EX_VAULT
Post 6F - INIT_POWER_MODE
Post 70 - INIT_VIDEO_DRIVER
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init
Post 73 - INIT_SATA_DRIVER
Post 75 - INIT_DUMP_SYSTEM
Post 76 - INIT_SYSTEM_ROOT
Post 77 - INIT_OTHER_DRIVERS
Post 78 - INIT_STFS_DRIVER
Post 79 - LOAD_XAM
Most Fails(cumulative): 0xA0
Shutdown
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 21 - INIT_SECOTP
Post 6D - INIT_KEY_EX_VAULT
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 61 - INIT_HAL_PHASE_0
Post 6D - INIT_KEY_EX_VAULT
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 21 - INIT_SECOTP
Post 61 - INIT_HAL_PHASE_0
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 50 - LOAD_UPDATE_1
Post 52 - BRANCH
Post 58 - INIT_HYPERVISOR
Post 5A - INIT_XEX_TRAINING
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 62 - INIT_PROCESS_OBJECTS
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6B - INIT_SFC_DRIVER
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 47 - RC4_DECRYPT
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 52 - BRANCH
Post 59 - INIT_SOC_MMIO
Post 5A - INIT_XEX_TRAINING
Post 5B - INIT_KEYRING
Post 5C - INIT_KEYS
Post 5F
Post 61 - INIT_HAL_PHASE_0
Post 63 - INIT_KERNEL_DEBUGGER
Post 64 - INIT_MEMORY_MANAGER
Post 6C - INIT_SECURITY
Post 6D - INIT_KEY_EX_VAULT
Post 6E - INIT_SETTINGS
Post 70 - INIT_VIDEO_DRIVER
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init
Post 73 - INIT_SATA_DRIVER
Post 75 - INIT_DUMP_SYSTEM
Post 76 - INIT_SYSTEM_ROOT
Post 77 - INIT_OTHER_DRIVERS
Post 78 - INIT_STFS_DRIVER
Post 79 - LOAD_XAM



updflash.bin log (if applicable):
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16537
Started Creation of the 16537 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.09.639
---------------------------------------------------------------
base path changed to C:\Users\Sarah\Downloads\J-Runner v03 (1) Core Pack\J-Runner\xeBuild
---- { Image Build Mode } ----
building jtag image




******* WARNING: could not patch SMC reset limit!


---------------------------------------------------------------
C:\Users\Sarah\Downloads\J-Runner v03 (1) Core Pack\J-Runner\781821183605\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Falcon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial :
ConsoleId :
MoboSerial:
Mfg Date : 09/05/2008
CPU Key :
1BL Key :
DVD Key :
CF LDV : 10
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.


Image of R-JTAG board:
20131111_013122.jpg

Images of close-up soldering to motherboard:
20131111_013437.jpg20131111_013327.jpg20131111_013522.jpg20131111_013225.jpg20131111_013056.jpg

Description of problem: Boots into Xell almost every time instantly. Usually boots into Dash but freezes on logo. Sometimes rater just shuts down on post 79 but says it is loaded but just black screen. Undo 5v, cpu and aud post and flash stock nand boots fine and plays fine never any problems. This way a normal use xbox before and never gave me any problems. I think I tried all settings multiple times tried reflashing nand, removed nand x qsb v3 (was going to remove it all but decided to post before i did) and wired direct. This is my first jtag/rgh/rjtag attempt. Worked on it for 8 hours yesterday and nothing changed. Tried blue wire on bottom of board first but almost always rrod, moved to top and rrod on a few settings. Dip 7 and 3 with 470 middle pos. of switch and aud on and rjtag board 1.2v give the most boots other wise rrod or stops i get alot of
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Shutdown.

Please help

Was the console working before you started: Y

(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
 
A

akatimshady

Noob Account
Dec 1, 2011
5
0
When I create xebuild image i get WARNING: could not patch SMC reset limit! does that have something to do with it. I tried to use clean falcon.bin to rebuild retail then create image from that but didnt work. I have no clue as to what smc config power is or how to fix. I googled the warning i got but mostly got pastebin logs or foreign posts.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
akatimshady said:
When I create xebuild image i get WARNING: could not patch SMC reset limit! does that have something to do with it. I tried to use clean falcon.bin to rebuild retail then create image from that but didnt work. I have no clue as to what smc config power is or how to fix. I googled the warning i got but mostly got pastebin logs or foreign posts.
Click to expand...
No - there's a known issue with Falcons and SMC config.

Read from this page onwards: http://team-xecuter.com/forums/showthread.php?t=95054&page=7
 
  • Like
Reactions: akatimshady
A

akatimshady

Noob Account
Dec 1, 2011
5
0
Changed SMC from 01 ANA 8280 PM 8665 VCS to 03 ANA 8080 PM 8665 VCS and it's booting now. have to do some more testing but seems ok so far. Thank you.
 
You must log in or register to reply here.