Falcon freezes on boot?

Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Console Type: Falcon


NAND size: 16


Dashboard version: 16203


CB version: 6754


Screenshot of NAND details from J-Runner:
Image is attached


J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
Screenshot attached


Image of R-JTAG board:
Images attached


Images of close-up soldering to motherboard:
Images attached


Description of problem:
The console will not boot to xell. It acts like it wants too boot but then the ROL freezes. Either player 1,2,3,4 show up then freeze, or 1,2,3 show up then freeze. Im pretty sure its not my soldering but ill let you guys be the judge of that. Ive done it with an without aud_clamp also. Ive tried all jumper settings and solder jumper settings. 1.2v shows not red but all four light orange sometimes only when 1.2 is soldered. The console just will not boot. Also when i unplug the av the four frozen lights will go away then come back when i plug it back in?


Was the console working before you started: Y

rater info.png3.PNG2.PNG4.PNG1.PNG5.PNG6.PNG
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You've not tried AUD_CLAMP yet. For that, you need to solder 1 & 3 on the QSB and that pad is still copper so has never been soldered.

Remember that when you switch wiring, unplug the PSU after writing the new xell (for at least 20 seconds) to clear SMC cache.

Also change the switch from 0 to 330/470.
 
  • Like
Reactions: Element18592
Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Tried aud_clamp as you described and still no difference. Now instead with or without the aud_clamp it sometimes gives me 3 RROD. I flash stock nand back and everything works perfect. Im at a loss? Have you ever seen the error i mentioned above, with the freezing on boot? I think if i cant get this going ill just have to move onto another mobo.
 
Last edited:
A

axelll

VIP Member
Mar 1, 2011
469
17
Everywhere
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Martin C said:
It's probably not this. None of these consoles have issues with RoL.

OP - can you post your POST output for when you get the RoL freeze?
Click to expand...
I hate to ask such a stupid question, but i need to get this booting. Anyways how would accomplish this?
 
Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Martin C said:
RATER gives you POST output.
Click to expand...
I was going to try that but now after about 7 seconds it give me 3 RROD where is usually trys to boot. My settings are DIP 7 On, 1.2 Solder jumper, jumper set to 470, aud_clamp applied with the 1&3 solder jumper.

Code: 
Version: 10Power Up
Waiting for POST to change
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 74 - INIT_SHADOWBOOT 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 74 - INIT_SHADOWBOOT 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 74 - INIT_SHADOWBOOT 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 64 - INIT_MEMORY_MANAGER 
Post 74 - INIT_SHADOWBOOT 
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 64 - INIT_MEMORY_MANAGER 
Post 74 - INIT_SHADOWBOOT 
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 74 - INIT_SHADOWBOOT 
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 74 - INIT_SHADOWBOOT 
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 74 - INIT_SHADOWBOOT 
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 64 - INIT_MEMORY_MANAGER 
Post 74 - INIT_SHADOWBOOT 
Post 24 - VERIFY_OFFSET_3BL_CC 
Post 1F 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 01 
Post 80 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 01 
Post 80 
Post F8 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post C0 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 01 
Post 80 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 40 - Entrypoint of CD reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 12 - FSB_CONFIG_RX_STATE 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 1B - RC4_DECRYPT 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 01 
Post 80 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 1B - RC4_DECRYPT 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 01 
Post 80 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 12 - FSB_CONFIG_RX_STATE 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 1B - RC4_DECRYPT 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 01 
Post 80 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Shutdown
I see it says something about video driver not sure what thats means exactly but keep in mind it boots no problem and doesnt RROD with the stock nand.
 
Last edited:
Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Now it just blinks ive tried all dip settings and it just wont boot. Thats with the jumper desoldered.
 
Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Well i have the motherboard sitting on top of a box and as i went to pick it up to get ready to desolder it the wire got caught and ripped the pad off :/. Will that effect anything? While i wait for a response im going to solder to the top side CPU_RST and ill let you know if that gives me better results.
 
Element18592

Element18592

VIP Member
Jun 4, 2013
116
23
Thats great to hear. But unfortunately the top CPU_RST gives me the exact same results. 3rrod with 1.2 and no boot with no solder jumper.
 
You must log in or register to reply here.