RGH Falcon HDMI Issues

[GSIBOY]

Hi Guys

Ive built my image with the latest multibuilder. The console boots fine with power to NXE and Xell Boots Black via Eject with Component Cables

Strange thing. When i try and boot with the HDMI cable with power i get nothing on screen but everything loads meaning ROL work fine and it boots.

When i power it up via eject XELL Reloaded screen the text is white and the screen is RED.

Anybody have suggestions? Seems like i cant boot the console via power with HDMI connected
I have tried coldbooting the console and TV

 

[esbmaepo]

And it worked fine before?

Have you tried reflashing your original nand and booted with HDMI?

 

[GSIBOY]

Yeah it worked fine before. Will try and flash the original nand back

 

[Krafter]

Do you have a cable that will give you composite out (Yellow/Red?White). It sounds like you just need to adjust your video settings. maybe it's set to a mode that the TV doesn't like.

 

[GSIBOY]

Do you have a cable that will give you composite out (Yellow/Red?White). It sounds like you just need to adjust your video settings. maybe it's set to a mode that the TV doesn't like.

Yeah composite cables work perfectly, The normal Yellow/Red/White and even the component cables.

But as soon as i put the HDMI cable in. It wont boot to dash but it boots to Xell via Eject but the text is white and the screen RED instead of grey/black

 

[TilVl]

Try resetting the video mode. Hook up with hdmi turn on xbox with controller guide button. Onecontroller syncs hold y and r trigger.

Sent from my SGH-T839 using Tapatalk

 

[GSIBOY]

Try resetting the video mode. Hook up with hdmi turn on xbox with controller guide button. Onecontroller syncs hold y and r trigger.

Sent from my SGH-T839 using Tapatalk

I have tried that, very strange and i tried a different HDMI cable , same problem. The console will just reboot and no picture. But Xell with eject gives me a red screen and all the info

 

[KhaineGB]

Just a stupid thought... but as a random test, will the console boot with HDMI if you leave the component cable plugged in?

I recall a slim user having a similar problem, and HDMI worked if the a/v was connected.

 

[razblade77]

was it working ok before for instaling coolrunner? try truning off the coolrunner and flashing the stock fw and see if it works ok then, if it still not working then remove the coolrunner and wires, look out for solder bridges and splashes when removing everything.