Falcon, r-jtag, demon, retail nand RROD

[leftie712]

Falcon worked great before install (still works fine reverted back to stock). Here are my install steps:
1. install demon.
2. read retail nand and flash it to demon.
3. I tested xbox, booted fine on retail and demon nands.
4. install r-jtag, got it boot to xell, and boots great to 16547

problem is when I try to boot to retail, I get instant RROD. There is no green light on R-jtag at all.

I can not figure it out what I am doing wrong. To me it seems that r-jtag is not turning off when switching to retail nand.
If I remove r-tag and flash stock nand to demon, both nands boot fine.

Thank you for your help

===================================================
Friday, February 14, 2014 7:35:59 PM

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Current: DemoN
Switching to XBOX
Reading Nand to C:\Users\xbox\Desktop\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
XBOX360
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0xC7 0x23E 
Reading Nand
Done!
in 0:25 min:sec

Reading Nand to C:\Users\xbox\Desktop\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Reading Nand
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Done!
in 0:24 min:sec

Comparing...
Bad Block ID  00C7 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  023E Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 00C7 [Offset: 0x334E00]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 023E [Offset: 0x93FC00]
Bad Blocks Remapped
Bad Block ID  00C7 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  023E Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 00C7 [Offset: 0x334E00]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 023E [Offset: 0x93FC00]
Bad Blocks Remapped
Nands are the same
Current: XBOX
Switching to DemoN
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0xC7 0x23E 
Writing Nand
Done!
in 0:31 min:sec

XeLL file created Successfully falcon.bin
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0xC7 0x23E 
Writing Nand
Done!
in 0:02 min:sec

R-Jtag Selected
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Finished
Falcon/Opus
Nand Initialization Finished
Moving All files from output folder to C:\Users\xbox\Desktop\J-Runner v02 Beta (283) Core Pack\750017183205
Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.11.647
---------------------------------------------------------------
base path changed to C:\Users\xbox\Desktop\J-Runner v02 Beta (283) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image


******* WARNING: could not patch SMC reset limit!

---------------------------------------------------------------
C:\Users\xbox\Desktop\J-Runner v02 Beta (283) Core Pack\750017183205\nandflash.bin image built, info:
---------------------------------------------------------------
Kernel    : 2.0.16547.0
Console   : Falcon
NAND size : 16MiB
Build     : JTAG
Xell      : power on console with console eject button
Serial    : 750017183205
ConsoleId : 022053391106
MoboSerial: 7578459202228315
Mfg Date  : 08/02/2008
CPU Key   : D97AF65F88EDE615002D1AA3125BD4FF
1BL Key   : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key   : 4F25E4ECD2FF589F259A2A7C9BC58C2B
CF LDV    : 20
KV type   : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\xbox\Desktop\J-Runner v02 Beta (283) Core Pack\750017183205
Image is Ready
Initializing nandflash.bin..
Falcon/Opus
Nand Initialization Finished
DEMON
Hardware   : Demon Phat
Firmware   : 1.4
Flash ID   : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0xC7 0x23E 
Writing Nand
Done!
in 0:31 min:sec

 

[gavin_darkglide]

This is going to sound crazy, but boot the demon nand, and while the console is on hit the nand switch button. Then power on the console. It should work normally until the next time the power is removed. I had 1 that did this, and so have others, and this was the only thing that worked. This is a documented problem, and I bet the console is throwing RROD 0022.

 

[leftie712]

This is going to sound crazy, but boot the demon nand, and while the console is on hit the nand switch button. Then power on the console. It should work normally until the next time the power is removed. I had 1 that did this, and so have others, and this was the only thing that worked. This is a documented problem, and I bet the console is throwing RROD 0022.

yup, it boots fine this way. how bad is it for demon to be switched this way?

 

[gavin_darkglide]

It wont hurt anything..... and as far as the one i had, you only had to do it everytime the console lost power. Honestly i think it has to do with the southbridge on some falcon consoles. dont quote me on that.