My Falcon RGH wont boot xell or go to dashboard, it just has the solid green light in the middle of the ROL, i was wondering if i should put the original nand back on with my Jr programmer v2 and then flip the coolrunner switch to prg and see if it boots to dashboard and if it boots to dashboard do i just write xell to the console again and then after putting xell on flip the switch back and see if xell boots and if it boots xell just put the 16537 freeboot on?
RGH Falcon RGH Wont Boot Solid Green LED on ROL
- Thread starter BloodShotModz
- Start date
scott1503
VIP Member
Martin C
VIP Member
scott1503
VIP Member
We still need pictures and all the information required on the template
or send it to the person you got it from unless you have messed it up and it's down to user error
or send it to the person you got it from unless you have messed it up and it's down to user error
Last edited:
TX Product(s) used: J-R Programmer v2
Console Type: Falcon
NAND size: 16
Dashboard version: 16537 (Before it stoped working)
CB version: 5771
Image of Coolrunner:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
My Falcon RGH wont boot xell or go to dashboard, it just has the solid green light in the middle of the ROL, i was wondering if i should put the original nand back on with my Jr programmer v2 and then flip the coolrunner switch to prg and see if it boots to dashboard and if it boots to dashboard do i just write xell to the console again and then after putting xell on flip the switch back and see if xell boots and if it boots xell just put the 16537 freeboot on?
Was the console working before you started: YES
Console Type: Falcon
NAND size: 16
Dashboard version: 16537 (Before it stoped working)
CB version: 5771
Image of Coolrunner:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
My Falcon RGH wont boot xell or go to dashboard, it just has the solid green light in the middle of the ROL, i was wondering if i should put the original nand back on with my Jr programmer v2 and then flip the coolrunner switch to prg and see if it boots to dashboard and if it boots to dashboard do i just write xell to the console again and then after putting xell on flip the switch back and see if xell boots and if it boots xell just put the 16537 freeboot on?
Was the console working before you started: YES
Last edited:
Antalpromille
VIP Member
Answer to your question(s) are yes.TX Product(s) used: J-R Programmer v2
Console Type: Falcon
NAND size: 16
Dashboard version: 16537 (Before it stoped working)
CB version: 5771
Image of Coolrunner:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
My Falcon RGH wont boot xell or go to dashboard, it just has the solid green light in the middle of the ROL, i was wondering if i should put the original nand back on with my Jr programmer v2 and then flip the coolrunner switch to prg and see if it boots to dashboard and if it boots to dashboard do i just write xell to the console again and then after putting xell on flip the switch back and see if xell boots and if it boots xell just put the 16537 freeboot on?
Was the console working before you started: YES
Antalpromille
VIP Member
I always work in jrunner, its so great theres no need to use nandpro any more.
Antalpromille
VIP Member
I depends on what the problem is, i cant get your pictures to work but falcon RGH1 is easy.
Antalpromille
VIP Member
Antalpromille
VIP Member
it coolrunner is flashed and i finsihed soldering the jr programmer v2 in and now i just need help writting the original nand back i have j-runner