Falcon RJTAG No video detected

[tonyt981]

Console Type: Falcon
NAND size: Not sure
Dashboard version:2.0.16202
CB version:Not Sure
Description of problem: I finished soldering all the QSB's and am attempting to boot xell. I already wrote xell to the xbox. The coolrunner has a solid red light and the xbox light is blinking green when i turn it on. However, i cannot get video output with av or hdmi cables.

Was the console working before you started: Yes

 

[chase]

complete the TEMPLATE with all logs and pics

 

[gavin_darkglide]

3 questions.

1. where are your pictures?
2. Why would you want an rgh2 falcon..... Most installers wouldnt touch falcons and zephyrs if they required rgh2, just because of this.
3. did you try booting stock?

Suggestions
Make sure it will boot your stock image, reroute your cpu_rst wire around the heat syncs or over the fan shrouds. Also try the CPU_RST cleaner, or longer/shorter lengths of wire, and different timing files.

Or to make your life 100% better install R-Jtag, Or the new phat hack, since r-jtag has been discontinued.

 

[Martin C]

3 questions.

1. where are your pictures?
2. Why would you want an rgh2 falcon..... Most installers wouldnt touch falcons and zephyrs if they required rgh2, just because of this.
3. did you try booting stock?

Suggestions
Make sure it will boot your stock image, reroute your cpu_rst wire around the heat syncs or over the fan shrouds. Also try the CPU_RST cleaner, or longer/shorter lengths of wire, and different timing files.

Or to make your life 100% better install R-Jtag, Or the new phat hack, since r-jtag has been discontinued.

His topic says R-JTAG.

OP - complete the template please.