Falcon wont glitch.

[bonovox]

Followed the guides and dumped my nand, created the ecc file and my Falcon just sits there on solid green light and red light on cool runner.

So heres the thing, I flashed back original nand and it boots fine. I then removed the cool runner wiring and there was no power at all. Re-wired the cool runner again and it boots fine and then tried the ecc file and it does the same as above. Does that suggest a problem with one of the wired connections, probably the CPU_pll_reset as this is the connection that I had a problem with. Why after removing the wiring would there be no power?

 

[Martin C]

without seeing pics it's almost impossible to tell.

 

[bonovox]

oh ok, I was just wondering about why it would have no power when I took out the cool runner and then when I wired it back again it worked fine (booted ok I mean)?

 

[Martin C]

probably because your STDBY_CLK point is damaged and when you desolder the wire you're breaking a connection?

Like I said, no pics = no idea!