JTAG Faulty Image Build?

[ScrubbaDubby]

I did a xenon and a falcon jtag last night w/out problems.

But today, i have been working on this zephyr for 3 hours. Soldering desoldering flashing reflashing rebuilding images etc.

The zephyr is on 7371 dash 4580 CB.

It boots fine to xell but refuses to boot (0022 error) after creating image and writing it.

I am using default image build settings and i have recreated and written 3 times now. But i can reflash og nand and rewrite xell and it works fine.

I have switched diodes out and wires with no luck. tried different RoL boards, resoldered and flux'd points. I can only think this would be a JR issue

 

[Menethoran]

I did a xenon and a falcon jtag last night w/out problems.

But today, i have been working on this zephyr for 3 hours. Soldering desoldering flashing reflashing rebuilding images etc.

The zephyr is on 7371 dash 4580 CB.

It boots fine to xell but refuses to boot (0022 error) after creating image and writing it.

I am using default image build settings and i have recreated and written 3 times now. But i can reflash og nand and rewrite xell and it works fine.

I have switched diodes out and wires with no luck. tried different RoL boards, resoldered and flux'd points. I can only think this would be a JR issue

Post your J-runner log...

 

[stefanounick]

post logs

 

[Menethoran]

Sorry... Post your JR log for both your reads and your write

 

[ScrubbaDubby]

i have read and wrote quite a few times and did a couple other consoles in the meantime so its quite lengthy. i can tell you there were no badblocks on either reads and no errors on writes. if someone is really willing to read through it all i will put it up though.

Friend of mine said it happened to him once he had to create 9199 image and then write the new dash image

 

[Menethoran]

i have read and wrote quite a few times and did a couple other consoles in the meantime so its quite lengthy. i can tell you there were no badblocks on either reads and no errors on writes. if someone is really willing to read through it all i will put it up though.

Friend of mine said it happened to him once he had to create 9199 image and then write the new dash image

Well then... feed it a hotdog...

 

[ScrubbaDubby]

threw that dog a bone with no luck.

attempted another zephyr with same exact problem they both boot xell though

if its any consolation the db1f1 was damaged on both consoles and used the alt directly on other side of the board. i know it works because it booted xell without a problem.

if it is jrunner, would somebody be willing for me to create my image for me? it would be much appreciated

 

[BL4K3Y]

You still haven't posted an image creation log.

 

[Menethoran]

Actually... how about some pics too... we havent seen your install, and you've been sh*t for the supply of information while still expecting help...

 

[madhaxer]

The consolation would be the logs that you have been asked for.

Edit did you read MartinC's template for help? ------->here it is<-------

 

[ScrubbaDubby]

https://dl.dropbox.com/u/65809321/Log.txt

those whom ask shall receive. i have redownloaded 9199 and 16202 and rewired nand-x several times on both consoles to no avail.

 

[madhaxer]

Ok how about pics of the soldering? That log looks like ether 1 you don't know what your doing or 2 your soldering is crap or 3 you don't know what your doing. I'm going for the former and latter.

 

[stefanounick]

if you delete more files and keep redownloading them, im gonna hunt you down and kill you
you know there's a server limit that has to serve all users..

 

[jsinger47]

i would suggest starting a thread in the "request for service" section

 

[madhaxer]

Were are you located? If in the USA I will do it for you probono just pay return shipping.

 

[Menethoran]

Flash Config: 0x00000000
This tells me... PLUG IN YOUR CONSOLE.....
Also, Pay someone to do the work for you... because you cant read instructions...
Flash Config: 0xFFFFFFFF
This tells me that you have no idea how to solder... Please refer to recommendation number 1
Flash Config: 0x01198010
This tells me you finally did something right...

TAKE IT TO A PRO!!!! You are not suitable for this kind of task

 

[Martin C]

Closed and infraction issued.

Failing to adhere to the simplest of tasks, such as posting necessary information is just a waste of everyone's time. I know you're clueless with this stuff (as if XeLL boots, your wiring must be ok - you already knew that though of course), but just ignoring the help format we've set out is just plain rude, especially since it's you asking for the help.

A 7 day cool-off should suffice.