Few randoms "play dvd" on 0225u lt+3.0

[repalankas]

[SOLVED] Few randoms "play dvd" on 0225u lt+3.0

Spoofed cfw with dummy from slimkey extract with calibration data included.
0225u original board with mx chipset.
Media is verb mkm003, burned with ihas124b at 2,4x
Error cames up with xgd2 and 3.

Rebooting console fixes everytime it appears.

I'm on dash 14719

 

[Ghost ic0n]

..... And this is in "Front Page News", why?

 

[repalankas]

oops, please, move it elsewhere... sorry!

 

[add1cted]

What drive do you have?

What's written on the sticker from dvd-drive?

It's a 0225 drive or 9504 and in JF appears as 0225?

 

[repalankas]

Sticker = 9504, JF tells 0225.

lt+2.0 didn´t display any play dvd message...

Just tried to reflash using dosflash, but same problem. (very few fails, but fails)

 

[mgrover]

should of burned at 4x.

 

[Drewssap]

Its a most common issue, last one posted this solved the issue can't find the post. Something like play dvd random, orso. I had this issue before, tried a new laser and all, problem solved when i put a tx pcb in.

 

[repalankas]

should of burned at 4x.

I have media burned with opc option on at 4x and the problem is the same.

 

[repalankas]

Its a most common issue, last one posted this solved the issue can't find the post. Something like play dvd random, orso. I had this issue before, tried a new laser and all, problem solved when i put a tx pcb in.

This post mentions 1175 drive, I have read it and didnt help me.
Now I'm probing with jf 1.89 as it went well when flashed lt+2.0 and the playdvd messages dissappeared... But i have not too much hope...

 

[add1cted]

Try an old version of JF and check it again if it works.

 

[Drewssap]

http://www.team-xecuter.com/forums/showthread.php?t=72404
This is the thread about a solution for the random play dvd, looks like a lot of work but if this works it should get a sticky value.

 

[repalankas]

Try an old version of JF and check it again if it works.

Seems to be solved (at least for now)

21 reboots = 0 errors.

All made under jf 1.89:

1 I took dummy.bin from slimkey extract (with cal data)
2 injected key into lt+2.0 0225u and saved the file.
3 Took the saved 2.0 file, used as source, and spoofed into lt+3.0 0225u
4 under mtkflash32, unlocked the drive (sputnik), erased, and writed the 3.0 file.
5 outro and drive relocked...

All fine!!!

Conclusion: probably some bug under jf 1.92 ???

Thanks!

 

[suntu ieu]

thanks.. i have the same problem... will try when i find the time to flash my drive...