RGH Final approval for tools , help.

[Hasoi123]

Hey guys, i am planning to RGH my falcon xbox and befor i order anything stupid i need your help.

So all i need are :

- Xecuter cool runner
- QSB parts
- Nand X
- Nand X to coolrunner

4) Way to update NAND-X (if choosen nand-x to program coolrunner... CK3i/CK3Pro to NAND-X ISP cable or USB Nand-X ISP update cable)

i didnt understand this part, i have Ck3 Lite, shloud i upgrade and purchase ck3i?

and soldering skiils of course.

anything else? tips?

thank you!.

 

[BL4K3Y]

The parts you listed are fine, you will only need the CK3i if you NAND-X doesn't have V3 code on it already.

 

[tr4ckerz]

In case of QSB - should not be used THESE instead of these listed by Hasoi123?

 

[BL4K3Y]

I believe that the newest batch of NAND-X has V3 code on it, the box will have a small sticker on if it does.

 

[BL4K3Y]

In case of QSB - should not be used THESE instead of listed by Hasoi123?

Yes, that is the QSB needed for the phat CoolRunner QSB install method.

The QSBs the original poster linked to are included in the NAND-X retail package.

 

[Hasoi123]

so there is no need for the ck3i right if the nand x version is 3 ? good.

 

[BL4K3Y]

There is no need for the CK3i if the NAND-X is already updated.

 

[Hasoi123]

alright blakey8, thx man , i think ill order these things

do you have any good guide that you can give me? both on installing and updating the cool runner?

 

[BL4K3Y]

Here is the installation diagram for your console, you can update the CoolRunner by downloading this pack. Connect the CoolRunner programming cable to the NAND-X and then to the CoolRunner, extract falcon.xsvf to your NandPro directory and type the following command:

nandpro xsvf: falcon.xsfv

This will program your CoolRunner with the correct timings which will enable your console to glitch (search the forum for more help and support).

 

[TeRRoR]

I just got unlucky. Ordered 2 Nand-x 3 days ago and got them in Mail yesterday and both were 2.0.
Now I have to wait for the cable.
Just fyi, I did leave in the comments to hold shipping till there is way to program the NAND-X

 

[deose]

Here is the installation diagram for your console, you can update the CoolRunner by downloading this pack. Connect the CoolRunner programming cable to the NAND-X and then to the CoolRunner, extract falcon.xsvf to your NandPro directory and type the following command:

nandpro xsvf: falcon.xsfv

This will program your CoolRunner with the correct timings which will enable your console to glitch (search the forum for more help and support).

Is it "nandpro xsvf: falcon.xsfv" or "nandpro xsvf: falcon.xsvf?

 

[Ubergeek]

nandpro xsvf: falcon.xsvf

Exactly as the instructions tell you.

 

[deose]

nandpro xsvf: falcon.xsfv

Exactly as the instructions tell you.

Instructions say "nandpro xsvf: falcon.xsfv"
You say "nandpro xsvf: falcon.xsfv"
The F and V are switched between you and instructions.

 

[Ubergeek]

i think you are either going mad or blind. you just quoted the exact correct command line 3 times in the same post - and which is exactley the same as my post you quoted and the same as the instructions and also the readme file that comes with nandpro :facepalm:

 

[chase]

Here is the installation diagram for your console, you can update the CoolRunner by downloading this pack. Connect the CoolRunner programming cable to the NAND-X and then to the CoolRunner, extract falcon.xsvf to your NandPro directory and type the following command:

nandpro xsvf: falcon.[COLOR=Red][U][B]xsfv[/B][/U][/COLOR]

This will program your CoolRunner with the correct timings which will enable your console to glitch (search the forum for more help and support).

typo at the end of the command .. should be .xsvf