RGH Finding correct LDV / CB and dashboard.

[sthetix]

Hi, i have a corona 16mb with no original NAND (the led turns LED if booted) but I manage to boot xell and i got this :

fuseset 00: c0ffffffffffffff
fuseset 01: 0f0f0f0f0f0ff0f0
fuseset 02: 0f00000000000000
fuseset 03: ac2e709333472a21
fuseset 04: ac2e709333472a21
fuseset 05: 35db636fb4799136
fuseset 06: 35db636fb4799136
fuseset 07: f000000000000000
fuseset 08: 0000000000000000
fuseset 09: 0000000000000000
fuseset 10: 0000000000000000
fuseset 11: 0000000000000000


Your CPU key : AC2E709333472A2135DB636FB4799136

The fake dash should be 14699 and LDV 1. Is that correct?
I generate 16747 dash from this 14699 but still i get red light after several cycles (error 0023). Is it a NAND problem or is it a hardware problem (maybe southbridge?) . but xell runs fine.

Thx

 

[john mathews]

maybe cpu problem or hanna possible im assuming reflow or reball after a reflow or reball then build a glitch image with what u have

 

[gavin_darkglide]

For a glitch image it doesnt really matter what the ldv is, but the cb is important. Your cb should be 13121. you can verify with this http://team-xecuter.com/forums/showthread.php?t=92607. And dont forget to create an rgh2 image.