LITEON 74850 Firmware LTPlus-025v1.91.bin

G

GavinDenton

Junior Member
Sep 11, 2011
21
0
Hi i have a Liteon 74850, This was flashed a long time ago with LT1.61.
I then updated the dash via usb to 13599 ( latest )
I used Jungle flasher to update to LTPlus-025v1.91 using the source as the CF 1.61.

In Jungle Flasher i got

Key has been tested and verified, thanks C4eva !
Sending Lite-On-Erase request to port 0x0970
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a

Sending Lite-On-Erase request to port 0x0970
..............
Drive returned Status 0x0
.....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x0970
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0970
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Write verified OK !

Sending Vendor Outro to port 0x0970
Drive is Lite-On..


HOWEVER when i turned on xbox and tried to play backup i got the xbox logo!
Tried a retail game got same xbox logo
Once i put in a game i get PLAY DVD
It plays DVD movies no problem..

PLEASE HELP..

I have a CK3 PRO but the probe is broken.....
 
G

GavinDenton

Junior Member
Sep 11, 2011
21
0
blakey8 said:
Did you check that LTPlus-025v1.91 showed your drive key before you wrote the firmware?
Click to expand...
Here is the Log i have changed my DVD KEY for security.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.87 Beta (277)

Session Started Sun Sep 11 02:35:29 2011



This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 21 I/O Ports.

Found 1 Com Ports.

Found 6 windows drives A: C: E: F: G: H:

Found 3 CD/DVD drives E: F: G:



Loading firmware file C:\Users\Gavin Denton\Desktop\Lite_CFW.bin

MD5 hash: 7adc598125df48b97be1d90936374187

Drive key @ n/a 888885AA55A8888855AA588888AA55AA

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: LT-Plus

Loading firmware file C:\Users\Gavin Denton\Desktop\JungleFlasher v0.1.87 Beta (277)\firmware\LTPlus-025v1.91.bin

MD5 hash: 5b94b528591d1028f6b1a9d7884c7a55

Genuine LT plus v1.91

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 1.91

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target



Target rev is LT 02510C, serial info not copied

Drive type Un-determined

Drive type Un-determined

Drive is Lite-On..



Key found in KeyDB at record (2 - Desktop)

Key is: 888885AA55A8888855AA588888AA55AA
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Be sure to check your cables after you re-connect the drive to your console. So your drive key was spoofed successfully from dummy.bin into LTPlus-025v1.91.bin?
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Open dummy.bin as the source firmware and select NO to the auto-load prompt. Manually find and open LTPlus-025v1.91.bin in the target box and click spoof source to target. From here, proceed to write the drive as normal, don't forget to outro. You stated that your Probe was broken so i'm assuming you couldn't re-dump the drive after the latest dashboard update.
 
x360ccm

x360ccm

BANNED
Jan 18, 2011
3,616
0
south coast UK
blakey8 said:
Open dummy.bin as the source firmware and select NO to the auto-load prompt. Manually find and open LTPlus-025v1.91.bin in the target box and click spoof source to target. From here, proceed to write the drive as normal, don't forget to outro. You stated that your Probe was broken so i'm assuming you couldn't re-dump the drive after the latest dashboard update.
Click to expand...

why would he need to say no to auto load.:tongue:
 
x360ccm

x360ccm

BANNED
Jan 18, 2011
3,616
0
south coast UK
as long as he loads dummy as source then it would auto load so no need to click spoof,unless i miss something.lol

mind it's getting on a bit and i just waitin for the rugby lol
 
x360ccm

x360ccm

BANNED
Jan 18, 2011
3,616
0
south coast UK
blakey8 said:
Yeah, that's right. I just didn't read the OP properly lol :D.
Click to expand...


to many hotpots you had lad lol:biggrin:

---------- Post added at 19:38 ---------- Previous post was at 19:36 ----------

his key dont look right to me

Drive key @ n/a 888885AA55A8888855AA588888AA55AA
 
G

GavinDenton

Junior Member
Sep 11, 2011
21
0
GavinDenton said:
Ok I am using JF 1.87 have loaded the source as my dummy with the key provided earlier. And target fw as LTplus-025v1.91..

Here I go again :)
Click to expand...
Ok same story XBOX logo for a retail game :(

Here is the JF log

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.87 Beta (277)

Session Started Sun Sep 11 03:27:43 2011



This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 21 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: E: G: H:

Found 2 CD/DVD drives E: G:



Loading firmware file C:\Users\Gavin Denton\Desktop\Dummy last effort.bin

MD5 hash: 2e5e7f2d99478c1ab6d7916c11ae1a39

Inquiry string found

Identify string found

Drive key @ 0xA030 XXX

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is:

Loading firmware file C:\Users\Gavin Denton\Desktop\JungleFlasher v0.1.87 Beta (277)\firmware\LTPlus-025v1.91.bin

MD5 hash: 5b94b528591d1028f6b1a9d7884c7a55

Genuine LT plus v1.91

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 1.91

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied



Target f/w saved as: Lite_CFW.bin



Sending Lite-On-Erase request to port 0x0970

..............

Drive returned Status 0x0

....

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0x0970

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0970

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0x0970

Drive is Lite-On..



Key found in KeyDB at record (2 - Desktop)

Key is: XXX

Key has been tested and verified, thanks C4eva !
 
G

GavinDenton

Junior Member
Sep 11, 2011
21
0
dgenx said:
to many hotpots you had lad lol:biggrin:

---------- Post added at 19:38 ---------- Previous post was at 19:36 ----------

his key dont look right to me

Drive key @ n/a 888885AA55A8888855AA588888AA55AA
Click to expand...
Can i just get the CK3 Probe V3 and use it with the conectivity kit pro to get my key again ???

---------- Post added at 03:41 ---------- Previous post was at 03:40 ----------
blakey8 said:
He said he changed it for security purposes. Does your console boot up fine without a disc in the drive?
Click to expand...
Yep
 
You must log in or register to reply here.