LITEON 74850 Firmware LTPlus-025v1.91.bin

[GavinDenton]

Yes, it would allow you to probe MPX01 and re-dump the drive. However, it will only read the drive key in the firmware that has just been flashed to it.

So if my key is incorrect ( as it may well be ) i have no options ??

 

[BL4K3Y]

Not unless you wish to attempt the reset glitch? However if the dummy.bin you are using is the original one you dumped and saved from the drive before-hand (I mean before you performed any erase or write commands), you should be fine.

 

[razadon]

if you not got a good key and the right one then sorry mate your jst messed up unless you doo reset glicth to confirm your key and undo it or wat eva because no point re dumpin firmware on drive because you'll be dump the firmware you put on and the key you loaded on soo that's why you should always dumb 2 to 3 time to make sure

---------- Post added at 03:50 ---------- Previous post was at 03:47 ----------

Are you sure you got a good copy? Try an orginal

 

[x360ccm]

gavin was that your original dummy

 

[GavinDenton]

if you not got a good key and the right one then sorry mate your jst messed up unless you doo reset glicth to confirm your key and undo it or wat eva because no point re dumpin firmware on drive because you'll be dump the firmware you put on and the key you loaded on soo that's why you should always dumb 2 to 3 time to make sure

---------- Post added at 03:50 ---------- Previous post was at 03:47 ----------

Are you sure you got a good copy? Try an orginal

Om trying to read originals and they work in my other xbox.

yone care to explane the reset glitch i have downloaded the files but are alien to me

 

[BL4K3Y]

There's plenty of threads here on the forum, I don't want to be accused of hi-jacking threads if I post links here .

 

[GavinDenton]

gavin was that your original dummy

These are the only ones i have lost loads due to virus. so the 5A etc is the only key i have

 

[vegaslightsss]

In your key database it says you have 2 keys saved. Could it possibly be the other key?

 

[razadon]

If you got your dummy bin just flash that back on and try and orginal n see if it works ??

 

[BL4K3Y]

What happens when you flash the drive back to stock firmware? If the key is correct, it will boot retails.

 

[GavinDenton]

There's plenty of threads here on the forum, I don't want to be accused of hi-jacking threads if I post links here .

Please email me them [email protected]

Do i need to solder or anything ??

 

[BL4K3Y]

Do i need to solder or anything ??

Yes you do, fine points as well.

 

[GavinDenton]

In your key database it says you have 2 keys saved. Could it possibly be the other key?

same key saved twice

 

[x360ccm]

Om trying to read originals and they work in my other xbox.

so originals work:rolleyes2ops read it wrong lol

 

[GavinDenton]

JF log below
Back to original FW and still noting works

Any final comments as it looks like i have a bad DVD KEY....

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.87 Beta (277)

Session Started Sun Sep 11 04:07:23 2011



This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 21 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: E: G: H:

Found 2 CD/DVD drives E: G:



Loading firmware file C:\Users\Gavin Denton\Desktop\JungleFlasher v0.1.87 Beta (277)\firmware\Lite_CFW.bin

MD5 hash: b2cdcf7d44b1685a3c97e365a7a02f4f

Drive key @ n/a 55AA55AA55AA ETC.....

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 1.91

Loading firmware file C:\Users\Gavin Denton\Desktop\orig-02510C-1c000.bin

MD5 hash: e7e0f802769fd80329784ca4b512f1a9

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: Stock

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0x0970

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name: Unknown type

Flash Size: n/a



Sending Lite-On-Erase request to port 0x0970

..............

Drive returned Status 0x0

.....

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0x0970

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0970

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0x0970

Drive is Lite-On..



Key found in KeyDB at record (2 - Desktop)

Key is: 55AA55AA55AA ETC.....

Key has been tested and verified, thanks C4eva !

 

[BL4K3Y]

Your drive key is wrong, I think it's time to do the reset glitch (check your PM).

 

[GavinDenton]

Your drive key is wrong, I think it's time to do the reset glitch (check your PM).

Reply sent

 

[x360ccm]

hows this goin

 

[BL4K3Y]

Well judging by the drive key he's posted (55AA55AA55AA ETC.....), the original drive key is gone and he's flashed the LT Plus firmware as-is with the "default" key.

 

[GavinDenton]

Well judging by the drive key he's posted (55AA55AA55AA ETC.....), the original drive key is gone and he's flashed the LT Plus firmware as-is with the "default" key.

YEP what I feared wrong key.... HELP