hi friends, excuse me for bad english... i'm italian. i have a full dump of 16d4s 0272, but the drive don't work well for a bad kamikaze procedure. Can i change the 16d4s with ltu2 without rgh ??? thanks..
FIRMWARE LTU2 0272 without rgh..is possible?
- Thread starter waltherx9
- Start date
alexander_1333
VIP Member
gazcoigne
BANNED
if you have a dummy.bin from the original drive you can buy any unlocked 16d4s pcb and flash a LT3.0 image to it for your console.
if you only have your DVD key you will most likely have to RGH it to get the nand files to build a LTU fw and need a LTU pcb for it
if you only have your DVD key you will most likely have to RGH it to get the nand files to build a LTU fw and need a LTU pcb for it
alexander_1333
VIP Member
Polocho
Senior Member
Don´t get a LTU2 board if you dont want extract the nand and cpu key from your board.
The best and more cheap way to fix your problem is to get a DG-16D4S board.
The best and more cheap way to fix your problem is to get a DG-16D4S board.
if he doesn't have the dummy bin he's got to use lut2 but I see he has a full dump so he will be ok.
Last edited:
jsinger47
Troll Eating Dogs
No. This is not true for 9504 osig consoles
In the case of a spelling error, I blame Tapatalk.