ANSWERED first demon install on corona v1 rgh console clarification

[jpoy808]

My first demon install . Already have an rgh console have all files. Have already installed demon have org nand 13559 on console. I am assuming I have to write org nand back to console then update to latest dash 16203 ? Do I need to set cr lite to prog? Then after switch back to nor?

 

[BL4K3Y]

What you said is correct.

The console won't boot a stock NAND image if the CR is set to NOR.

 

[jpoy808]

Ok it booted but now do I set it back to nor about to create glitch img to demon

 

[BL4K3Y]

Ok it booted but now do I set it back to nor about to create glitch img to demon

The CR should be set to NOR at all times when using the DemoN.

 

[jpoy808]

Ok do I flash cr lite with new xsvf with nand x or can I use the demon with jrunner?

 

[BL4K3Y]

Ok do I flash cr lite with new xsvf with nand x or can I use the demon with jrunner?

Have you read the DemoN installation guide?

If not, I suggest you do that now because everything you have asked has already been answered.

 

[jpoy808]

Just wanted to clarify

 

[BL4K3Y]

Just wanted to clarify

To be fair, the DemoN installation guides were written by the man who runs this forum.

I can assure you that his guides are 100% correct (he is heavily involved with product development after all).