First Successful RGH

K

kwazziee

Full Member
Jan 10, 2012
59
0
Okay so I've successfully done my first RGH but I don't know how to install FSD?

I found a site and have download the installer package and tried both ways. When I boot the console up it show the original Dashboard. Any help is appreciated.

I downloaded the FSD here: http://www.teamfsd.com/forums/newspage.php?news=810&sid=01a158110a71d5f135bdc645c68a5d07

This is the log of my J-Runner:
===========================
---------------------------------------------------------------
xeBuild v1.01.421
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Users\Kwazziee\Desktop\J-Runner\015678174107\nandflash.bin image built, info:
---------------------------------------------------------------
Console : Falcon
NAND size: 16MiB
Build : Glitch
Xell : power on console with console eject button
CPU Key : xxxxxxxxxxxx7F63D8C11F1C812D2A4BF
1BL Key : xxxxxxxxxxxx669E7B56794FB68563EFA
DVD Key : xxxxxxxxxxx46894EED8F011F61B9F9B
CF LDV : 10
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

press <enter> to quit...

Saved to C:\Users\Kwazziee\Desktop\J-Runner\015678174107
Image is Ready
INFO: You can write the resulting image to the nand using this app's Write Nand button
However if you wish, you may copy the "Nandflash.bin" and "Xenon.elf" to a USB stick.
Place that in console and boot the console using the eject button.
(this will use rawflash and overcome any bad blocks you may have on your nand)
 
K

kwazziee

Full Member
Jan 10, 2012
59
0
krypt1c said:
Download the dvd package file , burn it to disc , run it from the xbox dvd drive and follow the prompts.
Click to expand...

do i keep the Nand-x and cable connected or disconnect Nand-x?

do i switch teh CoolRunner to NORMAL or PROGRAM when i put in the DVD?
 
K

kwazziee

Full Member
Jan 10, 2012
59
0
Do i need to do anything else after I finish the RGH process before I install FSD? sorry i am asking too much but I am stuck for the last hout figuring this out after i have install RGH.

---------- Post added at 06:07 ---------- Previous post was at 06:00 ----------

sorry i am asking lot of question but after i install the RGH i have been stuck for the past hour trying to figure out how to install FSD.
 
krypt1c

krypt1c

VIP Member
May 23, 2010
974
48
Nottingham
I told you what to do over a hour ago , how the fcuk did you manage to get dressed this morning :)
kwazziee said:
Do i need to do anything else after I finish the RGH process before I install FSD? sorry i am asking too much but I am stuck for the last hout figuring this out after i have install RGH.

---------- Post added at 06:07 ---------- Previous post was at 06:00 ----------

sorry i am asking lot of question but after i install the RGH i have been stuck for the past hour trying to figure out how to install FSD.
Click to expand...
 
R

RnRdude

1
Oct 4, 2011
21
0
Netherlands
just download FSD2.2 and unpack it then rename folder to FSD and then copy folder over to an usb drive or usb stick.. thats all. :) there is no need to burn it on a cd lol
 
I

Ir0nman

Full Member
Mar 13, 2011
59
0
You have to setup DashLaunch + the .ini so that your console automatically boots into FSD. Use the installer you had ran first that installs it for you. There should be an option that says Install & Configure DashLaunch. You need to have this option checked including the install Freestyle Dash option before continuing. This will create the .ini and place it in the right location and also install DashLaunch for you.
 
N

nosherfj

VIP Member
Nov 1, 2010
1,094
0
Manchester UK
what's your boot time for your rgh just out of interest?
you ran the jrunners resulting nand image and your on 14719 dash on nxe i take it (this would have done your dash launch all in one)?
many ways to get fsd on to the hdd1 root. you could boot xex menu and ftp fsd over to the root also. make sure the launch.ini points to where ever you got your fsd. fsd is currently on version 725.
 
Last edited:
K

kwazziee

Full Member
Jan 10, 2012
59
0
nosherfj said:
what's your boot time for your rgh just out of interest?
you ran the jrunners resulting nand image and your on 14719 dash on nxe i take it (this would have done your dash launch all in one)?
many ways to get fsd on to the hdd1 root. you could boot xex menu and ftp fsd over to the root also. make sure the launch.ini points to where ever you got your fsd. fsd is currently on version 725.
Click to expand...

Got everything to work now. Sorry for asking too many question but I am really new to this. Thank to all that have helped me along the way.

@nosherfj - consistently 2-5 second on all 2 Slim consoles. I only install the CR and did not use the QSB.

Again thanks to all the great people helping along the way.
 
You must log in or register to reply here.