ANSWERED Fix Corrupt Nand-X

[xxxenvy]

From my previous post on the NAnd-X section (Which i cannot reply to). I believe that my Nand-X may be corrupt due to a bad flash. Is it possible to reprogram my nand-x to get it working again? only the red light comes on and it does not get recognized by my PC.

previous post:
http://team-xecuter.com/forums/showthread.php?t=77604

 

[Diamondgeeza]

Hi i am pretty sure the nand-x has a reset button on the top right hand side of the board.To reflash the Nand-x you will need a Xecuter Nand-X USB Update Cable or if you own a CK3 you can use a Xecutor CK3 to Nand-x Update cable.

Regards
DG
http://mrmodchips.co.uk/catalog/product_info.php?cPath=44_58&products_id=846

 

[xxxenvy]

Please see the link i posted on my first post. I already reset the nand-x and no difference. What i want to know here is how to reflash a corrupt nand-x if its already corrupted and nothing can be done about it. I just recently received a Nand-x USB update cable on top of what i already had (CK3i) and i still cant flash anything. So im pretty sure that the nand is corrupt or its blank.

So can someone please point me in the right direction regarding reflashing a corrupted nand.

 

[Martin C]

What happens when you try to flash it with flashmagic?

 

[xxxenvy]

autobaud error when attempting to connect.

 

[Martin C]

Have you ever managed to flash it previously?

 

[xxxenvy]

Have you ever managed to flash it previously?

no. i think what happened when i tried to flash it the first time, i cancelled it because it hung, had to reboot my machine and retry. Hence the reason why i think the nand is corrupt.

 

[Martin C]

It should still work however, provided you've not connected the cable upside-down at any point.

 

[xxxenvy]

Cable is in the position as it should be. Im fairly confident based on my research on this forum that my nand-x is corrupt. I just want to know if its possible to repair a corrupt nand or even a blank nand-x. How would one flash a completely empty nand-x with no arm?