Fix for Falcon and Jasper CR4 / RJTAG+ issues

subtorn

Noob Account
Mar 27, 2009
8
0
USA
thanks tydye81. my first jasper 512 big block cr4 xl install (rgh2+) was glitching hit-n-miss. maybe 1/20 or so for the most part. now i get instaboot almost 100% of the time even with the speed increase removed. spent the better part of a day reflowing solder points, cleaning up the board, redoing all wires, etc...run across this thread and problem solved :eek:
 

D4rk1

Junior Member
Jan 11, 2016
14
0
Since the title of the thread states that this fix also applies to RJTAG+ on CR4 - could anyone please tell me how I can implent the hacked smc from the OP into the RJTAG XeBuild-Image?

Code:
===================================================
Samstag, 30. Januar 2016 16:16:29

J-Runner v0.3 Beta (8) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing jannand1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Aud_Clamp Selected
R-Jtag Selected
Load Files Initiliazation Finished
Clean SMC detected
17489
Started Creation of the 17489 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.16.728
---------------------------------------------------------------
base path changed to Z:\Jrunner\xeBuild
---- { Image Build Mode } ----
building jtag image

done! fsroot found ok!

******* ERROR: clean SMC binary found? you should use a hacked SMC binary for JTAG images.



***** FATAL BUILD ERROR: -4 unable to complete NAND image

---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Failed
 

butowood

VIP Member
Aug 14, 2009
208
23
St. Theresa Point
Can someone point me to the right dircetion to get these files...the DL link is down...I have a more then a few Jaspers that I need to try with these files...as I had trouble booting after reprogramming \...