Flash behave!!

[Gunkar]

Hi,

I installed my Xecuter 3 CE, with the switch, it was ruff but i manage to do it , then with th flash another ruff fight and after clearing some bank that i wasn't suposto i finally got it and flash it.

I manage to flash it in the bank on on off off off, so i think, but for strange it may seams sometimes it doesnt load the X3CE (blue led) and i go to the swith and put for example off off on on off and voila lolol it works this is kind anoying so i am here to ask for your help a manage do FTP to the xbox and even put there a dashboard but i put on that i kind didnt live but is still there, i just want to solve the problem of the flash and if possible remove the switch so i dont get anymore braincrushed.

resolder again check continuety on the solder and cables everything looks good. i'm using the PCB so the risks of mistake are less.

 

[b0y]

Wait, so the problem is that you cann't boot to X3CL?

 

[DJBOOBY]

what bios did you use

 

[Gunkar]

I can boot sometimes!! Each time o turn the console off and on, it may or may not boot with the bios, the bios version is X3 3294 v16plus.bin, my console is the version 1.6b.

 

[DJBOOBY]

you have to do a very quick tap on the power botton with v1.6 xbox try and see it it boot all the time with eject button

 

[Gunkar]

"quick tap" sorry but my english is a bit roff, and you want me to press eject button before or after the power i did that sometimes and it was acting strange like booting and so

That my gamecube was easier to chip then xbox eheheh and i still have a ps2 to chip getting crazy with this...


Cumps

 

[Poida^]

"Quick tap", press the power button very fast.. OR
When pressing eject, you do it while the Xbox is off and turn it on using the Eject button. This should also boot with mod enabled.

If this doesn't work and it boots funny, then there is something wrong with your install or switch settings.

 

[Gunkar]

I was talking to a friend and i'm going to see if the switch is ok, i will let you know something in a couple of hours.

Thanks so far

 

[Gunkar]

back so i check the switch and i found that one pin doesnt seem to be working its the first one on the right, does that one do anything important?
I tested for Continuity with a multimeter.

 

[DJBOOBY]

yes it changes the bios bank
if you have a working x3 bios on banks 1234 then you can remove switch and the chip will still work

 

[Gunkar]

For strange it may seem its working now ?????? dunno how?? oh well,

damm lets how long it holds


Thanks for the help