LITEON DG-16D2S Flash gone bad.. Help please.

T

tbird2340

Full Member
Jan 17, 2011
46
0
Ok.. I am on 2.0.14699.0 dash.. I have a Lite-on Model No DG-16D2S and I have a Xecuter 360 Blaster CK3 kit. I downloaded the latest ixtreme firmware pack.. I haven't turned my 360 on in over a year.. It was flashed to LT2..


I wanted to flash back to stock to update to the latest dash.. I connected my 360 to my PC and opened up JF.. Found the IO port it was under.. Opened up my dummy.bin as my source and orig-74850C-1a000.bin as my target.. Clicked on spoof source to target then verified both keys matched.. Saved to file..




I then went to MTK Flash 32 tab and clicked on Lite-On Erase.. It gave me the expected messages twice.. After the second I cycled power on my 360 and after a few seconds it said it failed.. I looked down and the power appeared to be off on my 360.. Thinking that was the problem I tried the same process again.. However, this time I got another error first (which I can't remember and forgot to screenshot it).. I hit yes and then got the two regular messages.. Hit yes and cycled power again but got the same error..


Now, my drive doesn't show up in JF or the Bios.. Hope I'm not effed here..


Help! Thanks




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.94 Beta (320)
Session Started Tue Mar 26 22:01:18 2013




This is a Wow 64 process running on 2 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 1 Com Ports.
Found 1 windows drives C:
Found 0 CD/DVD drives




Drive is Lite-On..
Loading firmware file C:\Users\Xbox\Downloads\Dummy.bin
MD5 hash: 6bdcbc992edb35cc16e063b2f4aec4f9
Inquiry string found
Identify string found
Drive key @ 0xA030 22729EDDCE849FD324364A521C40D138
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: DVDKey32 extract
Loading firmware file C:\Users\Xbox\Downloads\Latest_iXtreme_and_Stock_F irmware_Pack-2013-03-26\Latest_iXtreme_and_Stock_Firmware_Pack\Stock firmware\LiteOn (Phat)\LiteOn_Pre_13141\orig-74850C-1a000.bin
MD5 hash: e4a34604fff9e7a642115a7287d47348
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target








Target f/w saved as: Lite_CFW.bin




Sending Lite-On-Erase request to port 0x1820
..............
Drive returned Status 0xD0
....................
Device Intro failed!
Lite-On-Erase NOT sent
Loading firmware file C:\Users\Xbox\Downloads\Dummy.bin
MD5 hash: 6bdcbc992edb35cc16e063b2f4aec4f9
Inquiry string found
Identify string found
Drive key @ 0xA030 22729EDDCE849FD324364A521C40D138
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: DVDKey32 extract
Loading firmware file C:\Users\Xbox\Downloads\Latest_iXtreme_and_Stock_F irmware_Pack-2013-03-26\Latest_iXtreme_and_Stock_Firmware_Pack\Stock firmware\LiteOn (Phat)\LiteOn_Pre_13141\orig-74850C-1a000.bin
MD5 hash: e4a34604fff9e7a642115a7287d47348
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target








Target f/w saved as: Lite_CFW.bin
Drive is Lite-On..




Sending Lite-On-Erase request to port 0x1820
..............
Drive returned Status 0xD0
....................
Device Intro failed!
 
C

CrazyBoyS

Junior Member
Jul 12, 2010
21
0
I had this issue this week with faulty board but got it working. First off do you have USBPRO v1 or 2? Also if you have V1 do you have CKI or CKI Pro?

I have V1 and Pro and basically if you have the probe or probe 3 just click on Lite-On erase and Probe the drive for 3-4 secs and let go and the drive will show up again. Then just outro the drive and see what happens. Of still missing restart process and it should read fine again and then write the firmware again.
 
C

CrazyBoyS

Junior Member
Jul 12, 2010
21
0
I had to probe to get mine to detect and intro did nothing. There are a few methods to this.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
CrazyBoyS said:
I had to probe to get mine to detect and intro did nothing. There are a few methods to this.
Click to expand...
I've never had to probe a lite-on drive to erase it, and that's over 300 drives and counting.
 
C

CrazyBoyS

Junior Member
Jul 12, 2010
21
0
I never had to also and aware you know what you are talking about that I know but explaining what I had to do this week to get it to work. Prob the MPX01 during the erase and it got the drive to finally populate after it crashed on me writing to it the first time.

1) Intro/Device ID
2) Yes
3) Power OFF
4) Groung the MPX01
5) Power ON
6) Release the MPX01

This is just one method to try, also try to do intro on drive. These are only 2 that I ever have to do when this happens.
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
CrazyBoyS said:
I never had to also and aware you know what you are talking about that I know but explaining what I had to do this week to get it to work. Prob the MPX01 during the erase and it got the drive to finally populate after it crashed on me writing to it the first time.

1) Intro/Device ID
2) Yes
3) Power OFF
4) Groung the MPX01
5) Power ON
6) Release the MPX01

This is just one method to try, also try to do intro on drive. These are only 2 that I ever have to do when this happens.
Click to expand...
This sounds more an issue with your OS/Drivers.
 
  • Like
Reactions: CrazyBoyS
C

CrazyBoyS

Junior Member
Jul 12, 2010
21
0
Ya I wouldent be surprised even though this is a fresh install. Was going to redo my drivers. Thanx for the explanation.
 
C

CrazyBoyS

Junior Member
Jul 12, 2010
21
0
Ya my extra box still not setup just moved into my new place and started up on my modding again. Been out of the game for 2y and still trying to get my server room setup.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Wait - if the firmware is half-cooked, you won't see it in JF.

Select your DVD drive port in JF and just send lite-on erase.

Power cycle the drive when prompted.
 
T

tbird2340

Full Member
Jan 17, 2011
46
0
Martin C said:
Wait - if the firmware is half-cooked, you won't see it in JF.

Select your DVD drive port in JF and just send lite-on erase.

Power cycle the drive when prompted.
Click to expand...
Then flash it back to stock choosing my dummy as the source and the stock fw as the target?
 
You must log in or register to reply here.