LITEON DG-16D2S Flash gone bad.. Help please.

[Martin C]

Then flash it back to stock choosing my dummy as the source and the stock fw as the target?

Yep.

 

[tbird2340]

Not having any luck.. Trying to do the lite on erase.. Flipping the switch off / on on the Blaster..

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~JungleFlasher 0.1.94 Beta (320)
Session Started Wed Mar 27 17:19:57 2013


This is a Wow 64 process running on 2 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 1 Com Ports.
Found 1 windows drives C:
Found 0 CD/DVD drives


Lite-On-Erase NOT sent
Lite-On-Erase NOT sent
Loading firmware file C:\Users\Xbox\Downloads\Dummy.bin
MD5 hash: 6bdcbc992edb35cc16e063b2f4aec4f9
Inquiry string found
Identify string found
Drive key @ 0xA030 22729EDDCE849FD324364A521C40D138
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: DVDKey32 extract
Loading firmware file C:\Users\Xbox\Downloads\Latest_iXtreme_and_Stock_Firmware_Pack-2013-03-26\Latest_iXtreme_and_Stock_Firmware_Pack\Stock firmware\LiteOn (Phat)\LiteOn_Pre_13141\orig-74850C-1a000.bin
MD5 hash: e4a34604fff9e7a642115a7287d47348
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target




Sending Lite-On-Erase request to port 0x1818
..............
Drive returned Status 0x7F
....................
Device Intro failed!


Sending Lite-On-Erase request to port 0x1818
..............
Drive returned Status 0x7F
....................
Device Intro failed!


The reason the port number is different in the logs is because I tried a different sata port..

 

[AllyNerd]

Are you waiting until the erase is done and once it says drive returned status such and such then power cycle the drive?

 

[Martin C]

You can't keep trying ports unless you're physically moving the SATA Cable????

 

[tbird2340]

Are you waiting until the erase is done and once it says drive returned status such and such then power cycle the drive?

I click on Lite-On Erase.. I wait for "Drive returned Status 0x7F" to come up and then I cycle the power.. After a few seconds it says failed..

I only have the SATA cable hooked up to the CK3.. That's correct, right? I haven't done this in over a year..

- - - Updated - - -

You can't keep trying ports unless you're physically moving the SATA Cable????

Yes, I moved it on my board to another SATA port (with everything shut down).. I have since moved it back to the original port it was plugged into when it WAS showing up in JF..

 

[Martin C]

Don't be messing with different ports etc. You could end up sending the Lite-on erase command to another device which accepts in.

Power the drive on. Select the port. Lite-on erase.

That's it.

 

[tbird2340]

Don't be messing with different ports etc. You could end up sending the Lite-on erase command to another device which accepts in.

Power the drive on. Select the port. Lite-on erase.

That's it.

I've tried that.. Numerous times and I keep getting what I posted in the JF log.. I have the 360 on, the CK3 to "PC" and the on/off toggle switch to "ON" and I get the green halo.

 

[Martin C]

Leave it on the whole time.

Once the Lite-on erase has finished, click Vendor Intro and follow on-screen instructions. Make sure you have the 'phat' option selected.

 

[skillet34]

Try using the stock firmware in source from ixtreme and then add your key in the target I think the dummy is fine as a source but you can not use it as target as it does not have everything you need in it. Do you have the original firmware dump? That is what is usually used its size is 256k I think

 

[Martin C]

Try using the stock firmware in source from ixtreme and then add your key in the target I think the dummy is fine as a source but you can not use it as target as it does not have everything you need in it. Do you have the original firmware dump? That is what is usually used its size is 256k I think

None of this will help him get the drive into Vendor mode.

 

[skillet34]

Yes that is true, I was replying to the firmware question about using the dummy bin was wondering if he had the original firmware dump. The drive will need to be in vendor mode first was posted before sorry should have included the quote. USB pro v2 makes this a lot easier a small investment for the ease of use. Could be the PC giving him grief I did have trouble before when I was not using the usb pro. finding the drives they would drop out for what ever reason. Started using the pro and no more problems.

 

[tbird2340]

Leave it on the whole time.

Once the Lite-on erase has finished, click Vendor Intro and follow on-screen instructions. Make sure you have the 'phat' option selected.

Left it on the entire time.. Clicked on lite-on erase..

Sending Lite-On-Erase request to port 0x1820..............
Drive returned Status 0x7F
....................
Device Intro failed!

 

[BL4K3Y]

Try and Intro the drive - that should give good flash chip properties and status 0x72 (Vendor mode).

To be fair, you would have probably had this done by now if you were using an X360USB Pro.

 

[tbird2340]

Try and Intro the drive - that should give good flash chip properties and status 0x72 (Vendor mode).

To be fair, you would have probably had this done by now if you were using an X360USB Pro.

Tried to intro without cycling power and then again cycling power and it failed both times..

 

[midiandy]

so have you tried hook mup the drive but with power down hit intro device tab wait for dots to appear on screen now power on the drive you should get a status 0x72 code this can now be written to.
this works even if no fw is present on drive

 

[Martin C]

0x7F - SATA issue. Get an x360USB Pro or try another machine with SATA on it.

 

[tbird2340]

OK I got a X360USBPRO today and somehow have managed to get the drive into Vendor mode.. What now?

 

[Martin C]

OK I got a X360USBPRO today and somehow have managed to get the drive into Vendor mode.. What now?

You carry on with the Jungleflasher PDF.

That 'somehow' is why the x360USBPro is the best tool for the job.