Flashbios problems

[cobracolin]

Flashbios boots up, but I can't navigate the screen. Its 3.03 on a 1.6 box. ANy suggestions?

 

[cobracolin]

I should specify its a X3CE. I used the solderless adapter too. I just can't select any options from the flashbios menu.

 

[DJBOOBY]

when you are in the flashbios screen unplug your controler and replug it into your xbox may have to try all the plugin points or you may have to get the xbox controler the one that comes with the xbox

 

[cobracolin]

I've been using the controller that came with the box and have tried all the ports. No luck...

 

[DJBOOBY]

Ok is your xbox V1.6 or a V1.6b if its a V1.6 the flashbios 3.0.3 will not work but if its a V1.6b flashbios 3.0.1 will not work so if its a V1.6 flash your backup bios with the X3 bios config dash just FTP the flashbios 3.0.1 too your harddrive make a folder in xbox call it "bios" put flashbios plus X3 bios as a backup then run thou flash backup in X3 bios till you flash it
if you have not flashed your chip with the X3 bios then get your hands on to flashx3 from xbins then make a dvd with it on with a dummy file then flash your chip with that flash bank 8 on chip then start xbox in bank 8 then once it starts switch over to 1Mb bank switchers on on off off off flash it with X3 bios
then flash your backup to (V1.6 3.0.1) (V1.6b 3.0.3 )
do not set password in your X3 bios as it has a bug