flashed bios but cant get xbox to boot up in blue mode

[shadypauly]

i recently installed my first mod chip its a X3ce i installed it in a v1.0 or 1.1 i made my flash bios disc and flashed bios everything seemed to flash ok, and xbox shut down after flash was done,,but when i turn xbox back on, in blue mode, it says there is no signal on tv,,like the xbox isnt on,,it boots into red mode and purple mode fine,,my buddy says check solder points on pin header 13 and 14.. i resoldered them all several times now and it still does same thing...can ya help me? thanx

 

[00h22]

i had this same problem on my first box with an x3 and ended up having to use an x2 bios, checked the soldering many times and that didnt resolve it, i did a second box recently with the x3 and had no problems, still havent figured out the deal with the first box i did but im gonna keep lookin into it. u could try runnin the x2 bios if you dont mind losing some features

 

[ozzy]

Are you using the standard AV pack

 

[shadypauly]

not sure what is ment by standard av pack,,but i did everything step by step and rechecked everything i have resoldered all points on pin headers as well as DO several times now..still does same thing,,i discovered last night that my xbox is a v1.0 is this a common problem using X3ce mod on a 1.0?

 

[KissMyWookie]

the standard av pack is the 3 wire cable that came with your xbox, one yellow, one red & one white.

 

[shadypauly]

sorry, yes using red/white/yellow AV cables

 

[michael816]

I was trying to do flash the bios by cd on time and i got the same problem... but when i flashed by http, it worked perfectly... my recomdation is to either re burn the cd to be sure everything is 100% good or flash it via http.