flashed bios with evox m8 now what?

[b0y]

What am I suppose to do. I just flashed my chip with evox m8 bios. How do I get to the bios settings for it. I only get to the MS dashboard..

-boy

 

[DJBOOBY]

you flashed the wrong bios for starters(m8 is ****)
you need the x3 3294 bios to get x3 config
x3 3294 v1.0 to v1.5 xboxs
x3 3294 v16 plus for v1.6 v1.6b xboxs
then you need to install a hacked dash

 

[b0y]

The only reason why I did that is because I can't flash with the x3 3294 it goes full on the yellow bar then 1/3 on the green bar...

-b0y

 

[Poida^]

What are your switch settings?
It should be ON ON OFF OFF. If your switch settings are correct, I would suggest checking your install again and reseating your chip.

The bios you flashed is useless on an X3. Use the correct bios.

 

[b0y]

Forget it, I got x3_3294 to work.

-b0y

 

[DJBOOBY]

well how did you get it to flash?

 

[b0y]

The pins on my x3 chip were bent where you connected the switch. So then I unbent them. Now everything works fine.

-b0y