BENQ Flashed lt+3 new backup not working

[ItchyM]

Hi
Ive updated to the latest dash 14719
Ive flashed benq drive to lt+3

now console plays originals fine my old back discs fine but Ive burnt a new disc and that one doesnt work keeps saying disc unreadable.

Im using a ihas burner with alos firmware
iso was checked with abgx all was fine
disc are verbatim 003

I burned image using imgburn using setting from tutorial on here

I then checked disc with kprobe
Date : 29/05/2012 19:09:23
Model : 2-0-0-0 H:ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MKM003 [Mitsubishi Chemical

Corporation]
Speed : Max
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 3827473
Sampling count : 219506
Errors : 0
PI Max : 24
PI Average : 2.11
PI Total : 58849
PIF Max : 2
PIF Average : 0.03
PIF Total : 752

all appears to be ok

ive tried 2 other drives all do the same thing

Any ideas? apart from changing the laser which is the last ditch attempt

Have I done things correctly? :rolleyes2:

 

[DUSTYB3N]

You could try the pot tweak. Tutorial available from the search tool. (This is only a temp fix)


Sent from my iPhone 4S using Keyboard and finger

 

[pas7680]

You say you have tried two other drives and they do the same thing, well that's a clear indication on bad media reguardless of what stats you get. Either that or you havn't flashed the drives correctly.

 

[Thanet_360s]

can you please post your imgburn log. Also what speed was you burning at??

 

[ItchyM]

You say you have tried two other drives and they do the same thing, well that's a clear indication on bad media reguardless of what stats you get. Either that or you havn't flashed the drives correctly.

I see what your saying but although the drives can play normal and old back ups they are in fact old drives so cannot rely on the quality of the laser having read that 3.0 puts an extra strain on the laser to rule this out I've ordered some new lasers. Is there anyway I can confirm that the media is aok? the drive Benq vad6038 64930c was flashed with LTPlus-0442-v3.0.bin dash was updated to 14719 before drive got flashed.

can you please post your imgburn log. Also what speed was you burning at??

sure thing took me a while to find it though :rolleyes2:

I burned at x2.4 as the guide on here said to do



I 18:05:05 ImgBurn Version 2.5.7.0 started!
I 18:05:05 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)
I 18:05:05 Total Physical Memory: 2,095,092 KB - Available: 1,544,060 KB
I 18:05:05 Initialising SPTI...
I 18:05:05 Searching for SCSI / ATAPI devices...
I 18:05:05 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G (Virtual)
I 18:05:06 -> Drive 2 - Info: Optiarc DVD+-RW AD-7640A JD06 (E (ATA)
I 18:05:06 -> Drive 3 - Info: ATAPI iHAS124 B AL0S (H (USB)
I 18:05:06 Found 2 DVD±RW/RAMs and 1 BD-ROM!
I 18:13:05 Operation Started!
I 18:13:05 Source File: C:\Program Files\se2\se2.dvd
I 18:13:05 Source File Sectors: 3,827,488 (MODE1/2048)
I 18:13:05 Source File Size: 7,838,695,424 bytes
I 18:13:05 Source File Volume Identifier: 14719
I 18:13:05 Source File Volume Set Identifier: eb768000MS UDFBridge
I 18:13:05 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:13:05 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:13:05 Source File File System(s): ISO9660, UDF (1.50)
I 18:13:05 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (H (USB)
I 18:13:05 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 18:13:05 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 18:13:05 Destination Media Sectors: 4,173,824
I 18:13:05 Write Mode: DVD
I 18:13:05 Write Type: DAO
I 18:13:05 Write Speed: 2.4x
I 18:13:05 DVD+R DL Reserve Track: No
I 18:13:05 Link Size: Auto
I 18:13:05 Lock Volume: Yes
I 18:13:05 Test Mode: No
I 18:13:05 OPC: No
I 18:13:05 BURN-Proof: Enabled
W 18:13:05 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 18:13:05 The drive only supports writing these discs at 4x, 6x, 8x.
I 18:13:05 Book Type Setting: DVD-ROM
I 18:13:05 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 18:13:05 Optimal L0 Data Zone Capacity: 1,913,744
I 18:13:05 Optimal L0 Data Zone Method: ECC Block Boundary
I 18:13:45 Set L0 Data Zone Capacity Succeeded!
I 18:13:46 Filling Buffer... (80 MB)
I 18:13:47 Writing LeadIn...
I 18:13:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 18:13:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 18:13:49 Writing Layer 0... (LBA: 0 - 1913743)
I 18:25:42 Writing Layer 1... (LBA: 1913744 - 3827487)
I 18:37:46 Synchronising Cache...
I 18:37:52 Closing Track...
I 18:37:53 Finalising Disc...
I 18:38:27 Exporting Graph Data...
I 18:38:27 Graph Data File: \Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_29-MAY-2012_18-13_MKM-003-00_2.4x.ibg
I 18:38:27 Export Successfully Completed!
I 18:38:27 Operation Successfully Completed! - Duration: 00:25:21
I 18:38:27 Average Write Rate: 5,327 KB/s (3.8x) - Maximum Write Rate: 5,750 KB/s (4.2x)
I 18:38:27 Cycling Tray before Verify...
W 18:38:34 Waiting for device to become ready...
I 18:38:48 Device Ready!
I 18:38:49 Operation Started!
I 18:38:49 Source Device: [0:0:0] ATAPI iHAS124 B AL0S (H (USB)
I 18:38:49 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 18:38:49 Source Media Supported Write Speeds: 4x, 6x, 8x
I 18:38:49 Image File: C:\Program Files\se2\se2.dvd
I 18:38:49 Image File Sectors: 3,827,488 (MODE1/2048)
I 18:38:49 Image File Size: 7,838,695,424 bytes
I 18:38:49 Image File Volume Identifier: 14719
I 18:38:49 Image File Volume Set Identifier: eb768000MS UDFBridge
I 18:38:49 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:38:49 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:38:49 Image File File System(s): ISO9660, UDF (1.50)
I 18:38:49 Read Speed (Data/Audio): MAX / MAX
I 18:38:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 18:38:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 18:38:50 Verifying Layer 0... (LBA: 0 - 1913743)
I 18:44:32 Verifying Layer 1... (LBA: 1913744 - 3827487)
I 18:50:16 Exporting Graph Data...
I 18:50:16 Graph Data File: \Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_29-MAY-2012_18-13_MKM-003-00_2.4x.ibg
I 18:50:16 Export Successfully Completed!
I 18:50:16 Operation Successfully Completed! - Duration: 00:11:26
I 18:50:16 Average Verify Rate: 11,175 KB/s (8.1x) - Maximum Verify Rate: 30,720 KB/s (22.2x)
W 19:23:28 Device Removal Detected!
I 19:23:28 Searching for SCSI / ATAPI devices...
I 19:23:28 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G (Virtual)
I 19:23:29 -> Drive 2 - Info: Optiarc DVD+-RW AD-7640A JD06 (E (ATA)
I 19:23:29 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 20:14:42 Close Request Acknowledged
I 20:14:42 Closing Down...
I 20:14:42 Shutting down SPTI...
I 20:14:42 ImgBurn closed!


Thanks

 

[ps2moduk]

So is it just XGD3 backups that are not working? Or any new backup that you burn regardless of size??

 

[ItchyM]

So is it just XGD3 backups that are not working? Or any new backup that you burn regardless of size??

I dont know as yet Ive only burnt one disc before I embark on a coaster session I thought I better ask :biggrin:

 

[pas7680]

it's extremely unlikely that you would have three drives that can't read xgd3, i've flashed maybe 150 drives since xgd3 came out and the only drives that i've have trouble with are old hitachi's. The problem lies elsewhere me thinks.

 

[krazydude4g]

Play a few games before trying to play the back ups i know sometimes when i flash it does that it acts like it needs a warm up from a fresh flash to me but idk

 

[Astromine]

Try the below settings, they work perfectly for me. I haven't had a bad burn in quite a while now.

Burn Speed = 4x
Layerbreak = Calculate Optimal
OPC = OFF
SB = ON
FHT = ON
OS = OFF
OHT = OFF

Let us know if you end up getting your problem resolved.

 

[TechTona]

Set write speed to 4x. And try switching on only Smart Burn.