Hello, this is my first post on this forum after searching the web for days to find help for my problem. I installed an unlocked pcb (v1.1) and successfully flashed it with stock 0401, but it wont eject when I insert it into the xbox or with the USBPro v2. It rapidly says open tray / close tray. I took it out and then tried to intro it on jungleflasher 1.92 beta and it constantly says staus 0x80. I have tried liteon erase but it still said 0x80. I installed using the solderless method and soldering with no luck at all.
LITEON DG-16D4S - SLIM Flashed TX Unlocked PCB v1.1, Now constant 0x80
- Thread starter KiiNGxDruMMeR
- Start date
Teajunkie
VIP Member
vegaslightsss
VIP Member
Yes, I followed the guide. I have read it many times over
and still nothing has worked. Here is the install:
Here is my jf log:
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Sep 01 11:14:39 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: G: H: I: K:
Found 1 CD/DVD drives E:
Sending Vendor Intro to port 0x0000
Status 0xD0
Re-sending Vendor Intro:
........................................
Aborted by User!
Sending Vendor Intro to port 0x0000
Status 0x80
Getting Status from port 0x0000
Invalid Status 0x80
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
Aborted by User!
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
Sending Vendor Intro to port 0x0000
Status 0xD0
Re-sending Vendor Intro:
.........................................................................................................................................................................XECUTER X360USB PRO removed.
..XECUTER X360USB PRO attached.
...........................................
Aborted by User!
Sending Vendor Intro to port 0x0000
Status 0xD0
Re-sending Vendor Intro:
..........................
Aborted by User!
No Drive Detected! DVDkey files extraction aborted!
Sending Vendor Intro to port 0x0000
Status 0x80
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Sep 01 12:44:35 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: G: H: I: K:
Found 1 CD/DVD drives E:
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Sending Vendor Intro to port 0x0000
Status 0x80
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Sep 01 13:01:01 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: G: H: I: K:
Found 1 CD/DVD drives E:
---------- Post added at 15:10 ---------- Previous post was at 15:09 ----------
Also, I forgot to mention I had a failed Kamikaze before i ordered the unlocked pcb.
and still nothing has worked. Here is the install:
Here is my jf log:
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Sep 01 11:14:39 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: G: H: I: K:
Found 1 CD/DVD drives E:
Sending Vendor Intro to port 0x0000
Status 0xD0
Re-sending Vendor Intro:
........................................
Aborted by User!
Sending Vendor Intro to port 0x0000
Status 0x80
Getting Status from port 0x0000
Invalid Status 0x80
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
Aborted by User!
XECUTER X360USB PRO removed.
XECUTER X360USB PRO attached.
Sending Vendor Intro to port 0x0000
Status 0xD0
Re-sending Vendor Intro:
.........................................................................................................................................................................XECUTER X360USB PRO removed.
..XECUTER X360USB PRO attached.
...........................................
Aborted by User!
Sending Vendor Intro to port 0x0000
Status 0xD0
Re-sending Vendor Intro:
..........................
Aborted by User!
No Drive Detected! DVDkey files extraction aborted!
Sending Vendor Intro to port 0x0000
Status 0x80
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Sep 01 12:44:35 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: G: H: I: K:
Found 1 CD/DVD drives E:
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Sending Vendor Intro to port 0x0000
Status 0x80
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Sep 01 13:01:01 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives C: D: E: G: H: I: K:
Found 1 CD/DVD drives E:
---------- Post added at 15:10 ---------- Previous post was at 15:09 ----------
Also, I forgot to mention I had a failed Kamikaze before i ordered the unlocked pcb.
XL3THAL VIP3RX
VIP Member
Threpwhistle
Senior Member
You say you have tried soldering but the photo is the cut wiring.Have You checked for continuity from your green, yellow and white at motor end to PCB? When you got the drive key off the Original PCB and flashed the Dummy bin across to the PCB did JF verify the key at the end Outro/ATA reset?
XL3THAL VIP3RX
VIP Member
he might of solder the wires to the board first rather than using the daughter board.
see if pressing the outro a couple of times helps.
I had soldered the board first, and then i tried to use the non solder method. Also I believe i have lost my dummy.bin :facepalm:. Im not sure how but I believe I deleted it when cleaning up my pc. And that leads me to believe I didnt correctly flash it :frown:. What can I do!? I still have my drive key and OFW. Thanks for the help guys!
Martin C
VIP Member
Like I said, It was a failed kamikaze :frown:
---------- Post added at 13:31 ---------- Previous post was at 13:26 ----------
And even if i could, I still cant intro the pcb!
---------- Post added at 13:31 ---------- Previous post was at 13:26 ----------
And even if i could, I still cant intro the pcb!
not possible
you could try this after rghing your box and getting the dvd key, http://translate.google.com/translate?sl=ru&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.hackfaq.net%2Fxbox360%2Fkeyarea_regen%2F but I doubt it works
edit:
actually, your dvd key is probably still in the JF database, so no need to rgh to get it
Last edited:
jsinger47
Troll Eating Dogs
If you have your ofw dump, just use that. Better than a dummy. Key area regen doesn't work
In the case of a spelling error, I blame Tapatalk.
jsinger47
Troll Eating Dogs
Do a bad flash intro. probe mpx01
In the case of a spelling error, I blame Tapatalk.
jsinger47
Troll Eating Dogs
Its on page 204 of the JF tutorial.
The only difference in your process would be that "phat" would be ticked, not "slim."
Hopefully that kicks it to vendor mode for you.
The only difference in your process would be that "phat" would be ticked, not "slim."
Hopefully that kicks it to vendor mode for you.
Probe V3 or homemade probe, intro/power cycle. Wala. Should not need being done though. Sounds like user error.