LITEON DG-16D4S - SLIM Flashed TX Unlocked PCB v1.1, Now constant 0x80

[BL4K3Y]

Disconnect and reconnect the USB Pro if JungleFlasher freezes up.

The PortIO Activity LED will most probably be flashing.

 

[KiiNGxDruMMeR]

Oh my god it worked! What should I do know to flash it, without my dummy bin!?

 

[BL4K3Y]

After all this time and help, you don't have dummy.bin?!

Why didn't you use SlimKey on the original PCB to obtain it?

You cannot do anything without that file, consider your console a DVD player (unless it's feasible to glitch the console).

 

[KiiNGxDruMMeR]

What about the OFW file? I have my key.bin?

 

[BL4K3Y]

Since you are using an unlocked PCB, one can only assume you didn't unlock the original PCB so you won't have a "full" firmware backup - are you sure you don't have dummy.bin anywhere on your PC?

 

[KiiNGxDruMMeR]

No i dont . I only have the ofw and key bin.

 

[BL4K3Y]

What do you mean by "OFW"?

Is that the file you saved when you used SlimKey?

If so, use that as the source firmware.

 

[KiiNGxDruMMeR]

Yes its Lite-on.ofw from the original pcb

 

[BL4K3Y]

Yes its Lite-on.ofw from the original pcb

I see.

Well use that as the source firmware in JungleFlasher .

 

[KiiNGxDruMMeR]

What do i use for target?

 

[BL4K3Y]

What do i use for target?

Assuming your console's dashboard version is 15574 and your original PCB is an 0401, load LTPlus-0401-v3.0.bin.

 

[KiiNGxDruMMeR]

Ok, heres the log:
Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !


Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..

Key found in KeyDB at record (4 - N/A)
Key is: BA02FC00A1FAFD86E2AA49C5723D3ED2
Key has been tested and verified, thanks C4eva !

Am I good to go?

 

[BL4K3Y]

Am I good to go?

You certainly are .

 

[KiiNGxDruMMeR]

Alright, thank you so much! This has been making me crazy for the past month! Now I just have to figure out how to get the drive to eject. I think I am going to directly solder it to the pcb again.