ok guys i am new to team xecuter, i have a xenon console here i dumped the nand 4 times 1 bad block in the same spot everytime.. i didnt remap because i have had 1 bad block in nands before and never had a problem.. i flashed xell that worked perfect i moved the console 4 ft to my left to hook it up to my tv to get the dvd key got that hooked the console back up to the nand-x and now it says my flash controller can not be found. i have no clue can someone please help me.. also i get e79 and i have check my soldering i know for a fact its good.. and since i cant read or write to my nand i cant flash the stock image back to the console.. if you can help my AIM IS LPQUICKY07.
flashed xell got cpu key then nand x says cant find flash controller
- Thread starter donpilkerton
- Start date
sick360mods
BANNED
man i have tried everthing, i even took another console and dumped the nand to make sure that it wasnt a software issue, but i really dont know, the console dosent e79 any more it boots right into xell but i still cant detect the flash controller
I got a similar issue, where I dumped the nand and now it won't detect the flash controller. I've tried everything I can think of, but can't get it working. I'm in the process of connecting two mobos together to use the other mobos flash controller. It's a right pain in the arse!
Martin C
VIP Member
There are some very delicate traces on J2D2, so what you're experiencing could be one of these traces broken. This should help to check for continuity..
http://www.team-xecuter.com/forums/showthread.php?t=55120
http://www.team-xecuter.com/forums/showthread.php?t=55120