flashing 1.6b need help

[myteeman]

i'm trying to flash and x3 on and 1.6b i accidently flashed the wrong bios and now it wont start normaly.i've read that flash bios 3.0.3 is only on banks 5-8 and that the back up is 3.0.1 and wont work with 1.6b. is there anything i can to to reflash the chip?

 

[Poida^]

You should of flashed to banks 1-4 so you can go back to bank 5-8 if this thing happens...
Try getting finding xbox with x3 other than 1.6b to flash your chip...

 

[myteeman]

i couldnt flash 1-4 because it gave me a blank screen . only bank 5-8 gave me the flash bio screen

 

[myteeman]

i also tryed another xbox 1.6 but every time i tried to flash the chip it got to the end of the green and said programming failed

 

[Poida^]

i couldnt flash 1-4 because it gave me a blank screen . only bank 5-8 gave me the flash bio screen

Blank screen was the boot up...

Once you are in flashbios you can change the switches to the bank you want to flash to! The message is on the screen when u flash.

Make sure the switches are correct when flashing from another xbox, and the chip is making contact with all the pins properly.