Flashing DG-16D5S 1175

[Tenkic]

I have de-soldered the JRP & DGX, now starting from the bare beginning since it wouldn't glitch after trying an assortment of different wire lengths.
Will continue to build on this thread when time suffices.

1. Identification
Console Type: Corona V1
NAND size: 16 MB

 

[playingmax]

we need pics of all points.

- - - Updated - - -

and log

 

[Tenkic]

Steps:
1. Update FW .HEX to JRP v2 in bootloader mode
2. Reset
3. Switch to normal mode

Issue:
I have read the nand quite a bit ago and since then I can't remember what was done to the nand or written to it, but this output is completely wrong. Can I write back my original and correct nand dumps?
This is my output when I read the nand:



Reading Nand to D:\Systems & Games\XBOX 360\LTU Xbox Flashing\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Reading Nand
Error: 002 reading block 0
"
"
etc
"
"
Error: 002 reading block 3FF
Done!
in 4:12 min:sec


Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same