Flashing help!!!

hahnlogic

Noob Account
Jun 9, 2009
8
0
alright here i go...
to make a long story short i had my box working perfectly before i bought my 360, and put my xbox 1 in my closet. When i pulled it out yesterday i found out that my font bank controler(the one that sticks outside the xbox with the bank switches) the plug on the lower left side was busted off, so here the problem i can't get the box to fully turn on it turn on then off 3 times and frags(so it's something F***ed up with the bios... so...
1.) unplugged the front panel so it would boot normal
- then flashed it using my hard drive with 3294
- flashed perfectly
2.) no when i turn on the xbox it still turn on and turns off and frags out... but i saw online that the chip is suppoes to turn purple once in flashbios screen and i can't tell, so i don't know where to look for this problem... please someone help me!!!!
 

Obi Wan

VIP Member
Feb 10, 2006
278
0
a**h**e
bettyboy.digisatt.com
Check the D0 connection, it might touch some other points, and it should not.
Check all solder points to see if they are perfect.

Obi
 

ollieki

Noob Account
May 21, 2009
9
0
ireland
can you point me into the rite forms my sata card keeps freezing when i plug it in.what drives do i have to delete cheers