CK3i Flashing Lite-On DVD Drive HELP

W

WHiiT3-BoY

Full Member
Jan 26, 2012
33
0
i have a lite-on dvd drive that is in an old xbox and the sticker says benq but it wasnt reading the dvd drive so i try to flash it the lite-on way and it read so i put a firmwire on it but after it was dont i pressed the eject button on the ck3i and it didnt eject so idk what i did. its my first time doing it so how can i put the orignal firmwire back on it and how do i kno what custom firmwire to put on it. a video tut would be great. THANKS
 
W

WHiiT3-BoY

Full Member
Jan 26, 2012
33
0
blakey8 said:
You have a Lite-On drive, did you get the drive key?
Click to expand...
when i read the drive it gave me 5 files

Key.bin
Inquiry.bin
Indentify.bin
Serial.bin
Dummy.bin

I saved all them to my desktop

i download the file thats called Latest_iXtreme_and_Stock_Firmware_Pack+(1)

inside it i went to firmwire and replaced the firmwire on the lite-on dive with a file called

LTPlus-0225-v3.0.bin

so now when i press the eject on the ck3i it wont eject
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
WHiiT3-BoY said:
when i read the drive it gave me 5 files

Key.bin
Inquiry.bin
Indentify.bin
Serial.bin
Dummy.bin

I saved all them to my desktop

i download the file thats called Latest_iXtreme_and_Stock_Firmware_Pack+(1)

inside it i went to firmwire and replaced the firmwire on the lite-on dive with a file called

LTPlus-0225-v3.0.bin

so now when i press the eject on the ck3i it wont eject
Click to expand...
if you are using 0225-v3.0.bin you are using the wrong file :facepalm: should be 0251
 
You must log in or register to reply here.