I'm flashing my m28, and everytime I flash it only goes to 5%, 12%, etc, and stops, I've been using the 10 sec. method, should I just being trying different seconds of waiting? or is it something else
flashing m28 issues
- Thread starter bboy59
- Start date
no you have to do the 10 thing to get in the drive.
what are you using to flash with.floppy or usb
what are you using to flash with.floppy or usb
the 10 sec worked if you are getting in the drive.
after it starts it should go threw 4 banks to 100 each time.on a usb it will do this fast.after that it will start samtool dont restart your computer till this is done.even when it says restart the computer.
after your computer put up xtreme master.cut off the power hit the number by xtreme master.wait 10 sec then turn the 360 on.it should start the dump.
ya what are you doing idump or iflash
after it starts it should go threw 4 banks to 100 each time.on a usb it will do this fast.after that it will start samtool dont restart your computer till this is done.even when it says restart the computer.
after your computer put up xtreme master.cut off the power hit the number by xtreme master.wait 10 sec then turn the 360 on.it should start the dump.
ya what are you doing idump or iflash
mine never stopped it just keeps going.(it goes to 100, 4 times.) till samtool starts.then it stops for a min.then builds the hack firmware.then its done.
i would go to iprep. find it here
http://www.360mods.net/Downloads/c=18.html
try this firmware 1st if it works then you can update later.
ixtreme v1.2 fast_read.rar.(not the 1.2 revc)you can find it you know where in the old folder
http://www.360mods.net/Downloads/c=18.html
try this firmware 1st if it works then you can update later.
ixtreme v1.2 fast_read.rar.(not the 1.2 revc)you can find it you know where in the old folder
No luck, stopped at 8%, this just sucks, I've gotten all these different percents, but no 100% lol
man at this point im at a loss.all i can think of is try different things.
new usb flash(ive heard some dont work right)
new sata card(who knows) new sata cable.
different computer(i had to do this.my old computer would not work.it did not do what your is doing but what the hell)
if i think of some thing ill post it
let me know what happens
new usb flash(ive heard some dont work right)
new sata card(who knows) new sata cable.
different computer(i had to do this.my old computer would not work.it did not do what your is doing but what the hell)
if i think of some thing ill post it
let me know what happens
I think the best & most logical idea would be to first try a different USB flash drive.
If still no luck you could try NTFS DOS method, its just as easy.
If the same, try a new SATA cable.
Failing that try a different PC, if you use your 6421 card in another PC and it still does the same, then it probably points at your card so get a new one and try that.
If still no luck you could try NTFS DOS method, its just as easy.
If the same, try a new SATA cable.
Failing that try a different PC, if you use your 6421 card in another PC and it still does the same, then it probably points at your card so get a new one and try that.
Where in any of your other posts did you mention you were using the Blaster???? :evil:h2omat said:
Answer = None! :roll: If your asking for help you have to give us all the info!
If your having touble flashing with the Blaster then you either have it connected wrong or you damaged it when you installed it. Maybe you bent some of the pins where the internal PCB connects to the external part.
The Blaster is a nice bit of kit, makes reflashing/updating so much easier. You must have done something wrong or damaged the Blaster components somehow.
Anyway, nevermind, you have done it now I guess. :roll: