Flashing Nand To Stock On Falcon Xbox 360 Phat

[genetik]

I Flashed My Original Nand Back To Stock On Phat Falcon and Uninstalled All The Wires For Cr3 and Now I Get 3rrod no error screen or anything how can I fix this please help!

I'm using nand x cables with jr programmer to flash nand with the latest jrunner I will post up the log when I get back on my comp if needed.



Edit:
Here Is My Log

Initializing nanddump2.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Comparing...
Bad Block ID 0380 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0380 [Offset: 0xE70000]
Bad Blocks Remapped
Bad Block ID 0380 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0380 [Offset: 0xE70000]
Bad Blocks Remapped
Nands are the same
Retail Selected
Version: 01
Flash Config: 0x01198010
Writing Nand
nanddump2.bin
Error: 202 writing block 380
Done!
in 3:46 min:sec

 

[jsinger47]

My car won't go forward when i push the down the pedal? How can i fix it?

 

[Taijigamer2]

RROD could be anything. Please provide the secondary error code to give us more information.

edit: Lol, jsinger beat me to it.

 

[genetik]

I know but no error code shows up on my screen it just has the rrod

 

[genetik]

RROD could be anything. Please provide the secondary error code to give us more information.

edit: Lol, jsinger beat me to it.

Nvm I got the code from doing the eject and sync button It was 0022

 

[jsinger47]

99% of the time, this is one of two issues:

1. You LDVs are messed up with your stock NAND
2. GPU needs reflow

 

[Taijigamer2]

Oh dear, feels like dejavu. I had a similar problem the other day
http://team-xecuter.com/forums/showthread.php?t=144881
turns out I fried the CPU somehow.

 

[jsinger47]

Oh dear, feels like dejavu. I had a similar problem the other day
http://team-xecuter.com/forums/showthread.php?t=144881
turns out I fried the CPU somehow.

Yeah, you had a very rare case. Lets hope he's not in the same boat.

 

[genetik]

99% of the time, this is one of two issues:

1. You LDVs are messed up with your stock NAND
2. GPU needs reflow

I dont see how it could be my ldv becuase i never updated while on rgh and to my understanding thats how the ldv could get messed up and as for the gpu needing reflow i dont think thats it either because it was working perfectly fine when it was rghed

my ldv on the info says 0 for the top one 7 for the bottom left and 8 for the bottom right.

 

[Haaris]

My car won't go forward when i push the down the pedal? How can i fix it?

you could turn the ignition on it might help lol
and take of the hand brake

 

[genetik]

RROD could be anything. Please provide the secondary error code to give us more information.

edit: Lol, jsinger beat me to it.

I fixed it it turns out I was writing the wrong backup nand I had now it's working you can close this thread now