flashing problem

[rhannahs]

alright well, i got the bios flashed, and it rebooted when it finished, but now when it starts up it turns on, powers off, turns back on and powers off again, then it turns back on and the light flashes green and red... when i start the xbox without the mod chip enabled it works fine.... what did i do wrong? thanks! and happy turkey day!

 

[scottevil]

sounds like you may have used the wronge bio's file which version xbox do you have.

 

[rhannahs]

xbox version 1.0, i used xeniumOS 2.0 beta 2... what am i supposed to do? :? i hope i didnt fry my mod chip...

 

[scottevil]

You should flash with xecuter bio's version 1959 for an x3.

 

[rhannahs]

how do i reflash it? when ever i boot it with my mod chip enabled my error occurs... it turns on, turns off, turns back on, then off, then turns back on flashing red and green... i used the first two banks when i flashed it... so maybe i can flash it to another bank, but i still cant boot it to the orginally flash bios screen...

 

[scottevil]

just set your switchs to on on off off off then press power and eject at the same time this should boot you to your back up bio's and just reflash.

 

[rhannahs]

alright should work, if not i'll post it, thanks for the help

 

[Redneck]

if this doesnt work, check your d0

 

[halo24uk04]

why the hell didn't he flash an xecuter bios on an xecuter chip??

duh :?:

 

[halomaster7777]

Yeah WTF did he not see the Xecuter section in Xbins

 

[rhannahs]

alright it works, what i just installed was a bios right? if i want to play burned dvds for example i need to install a dashboard correct? and if so, what dashboard would you reccomend? thanks

 

[rhannahs]

because i downloaded it off of a website... i didnt bother with the whole xbins mirc thing i thought i had the right file, ovbiously i didnt, sorry im not as talanted as you...

 

[halomaster7777]

HA talented try common sense buddy, don't trust anything other then xbins for BIOS

 

[rhannahs]

haha sorrry.. "what i just installed was a bios right? if i want to play burned dvds for example i need to install a dashboard correct? and if so, what dashboard would you reccomend? thanks"

 

[rhannahs]

bump

 

[xmod]

Question about which would be a better drive for ripping?

Question about which would be a better drive for ripping?

BenQ or Liteon with 0800 fw

Its going to be a spare 360 drive hooked up just for ripping my Original 360 games..

Any input would be greatly appreciated..

Thanks

Deuce

 

[ReMix]

Re: Question about which would be a better drive for ripping

which ever reads better

they use the same laser, but i believe that lite-ons operate quicker

however, if you are worried about bad rips, go with whichever you've had less problems with

 

[xmod]

Re: Question about which would be a better drive for ripping

which ever reads better

they use the same laser, but i believe that lite-ons operate quicker

however, if you are worried about bad rips, go with whichever you've had less problems with

maybe your misunderstanding me Joe.... I'm buying another drive, I just wanted peoples thoughts on which was the best drive to use for a ripping drive.. BenQ or Liteon? and depending on what was said I would get that choice..

I did some reading on the interenet to see if there was a better but not sure..

Thats why I put the question out to the forum just to get feedback on this topic.

Thanks

Deuce

 

[GodZilla]

Re: Question about which would be a better drive for ripping

There is very little difference operationally - Liteon's a little quieter - deciding factor for me would be price!

 

[xmod]

Re: Question about which would be a better drive for ripping

Cool... that's what I thought I was just trying to get what the take was ref the forum.

Thanks Braveheart