Flashing Problems

[Korby Heinsen]

Can someone please help me, i need to know what I have to do now that I have installed my Xecuter 3 CE modchip and X3 control panel?
Specifically what postions do my switches need to be in for the next step
what exactly do I need to do to flash......
I have a 200GB HDD i want to install what do i need to do to make it work.

If possible could someone give me step by step instructions?
if it would help email me at [email protected] -make your subject something ill notice and not delete as junk mail.

 

[nartac]

I really feel for you but I believe you haven't put too much effort in searching and reading. That's the only way to learn. I, however, will help you to get started so that you can get somewhere at least and then after reading further yourself, you will be able to understand more.

First, X3CP works like X3 pro switch. In your case, you want to flash your X3 bios to banks 1234 or banks 5678. X3cp has 4 buttons and a flash protect button so for you to be able to flash, make sure the flash protect button is in the out position and is indicated as red when turned on. To select banks 1234, the positions of the buttons has to be 1-on 2-on 3-off 4-off therefore the 1&2 buttons has to press in (indicated by blue light when turned on).

Now you are ready to flash your X3 bios. If you don't know where to get it, then read here: http://www.xbox-scene.com/articles/xbins.php. You then proceed to flash your bios via several methods of your choosing: http://www.teamxecuter.com/flashbios/

For the rest, you can read on your own. This is a good start for noobs here: http://www.xbox-scene.com/tutorials.php?showall=1