LITEON DG-16D2S Flashing process looks good, but wont play backups

[Rockerao]

I just flashed a phat liteon (originally 74850, now 02510c), everything looks good, using x360usb pro+ ck3i+ probe3. No single error in JF, but when the drive is in xbox it wont play backups. It plays originals without any problem, so the drive is probably ok. When backup is inserted is says play game and after launching the game it shows "Unrecognized disc" error.

The only reason which i have thought about is the dvd. Is not verbatim (is imation which is good quality dvd) and it has been used in 10´s of xboxes without any problem before. It is xgd2 game. Can the drive be so sensitive?

Anyway, my jf log is here:

JungleFlasher 0.1.92 Beta (304)
Session Started Mon Nov 12 16:26:26 2012

This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 3 Com Ports.
Found 4 windows drives C: D: E: F:
Found 2 CD/DVD drives E: F:

Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.............................
Serial flash found with Status 0x52
........
Extracted drive key passed Verification !

key returned: XXXXXXXXXXXXXXXXXXXXECA2D3B26DDA
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 30 32 35 31 30 43 41 30 - 41 30 44 36 30 38 43 47 02510CA0A0D608CG
0030: 37 33 38 38 30 38 30 30 - 33 34 38 20 20 20 00 00 73880800348 ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 30 32 35 31 30 43 20 20 - 00 00 00 00 00 00 00 00 02510C ........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 38 - 43 47 37 33 38 38 30 38 ....D608CG738808
0020: 30 30 33 34 38 20 20 20 - 00 00 00 00 00 00 32 30 00348 ......20
0030: 31 35 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 15C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00 ..

0000: 44 36 30 38 43 47 37 33 - 38 38 30 38 30 30 33 34 D608CG7388080034
0010: 38 20 20 20 FF FF FF FF - FF FF FF FF FF FF FF FF 8 ............
0020: FF FF FF FF FF FF FF FF - 41 30 FF FF FF FF FF FF ........A0......
0030: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 30 FF FF ............A0..


Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 XXXXXXXXXXXXXXXXXC19ECA2D3B26DDA
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Key added to database

Auto-Loading firmware file C:\Jungleflasher\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

Sending Lite-On-Erase request to port 0x0000
..
Drive returned Status 0x90
.......
Serial flash found with Status 0x72
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Lite-On..

Key found in KeyDB at record (99 - XXXXXXX 84205)
Key is: XXXXXXXXXXXXXXXXXXX19ECA2D3B26DDA
Key has been tested and verified, thanks C4eva !
XECUTER X360USB PRO removed.

 

[Martin C]

What game is it?

What dashboard are you on?

 

[Rockerao]

f1 2011, 15574

 

[Martin C]

Does the drive sound like it's struggling to read it when you first put it in?

 

[Rockerao]

yes it is doing something like that

 

[Martin C]

I would do two things:

1. run your backup through Kprobe2. See what results you get.

2. Clean the lens on the DVD laser. If this doesn't help, replace the laser completely.

 

[Rockerao]

that dvd was running perfectly on other consoles, even half hour before it was running on slim console.

and originals are running without any struggle, only backups are doing it... that drive was never before opened/flashed and xbox is in perfect condition

 

[Martin C]

So why ask for help if you don't want it?

You said yourself it sounds like the drive is struggling, so the issue is either the media or the drive.

 

[Rockerao]

i am asking whether it should be medium (which was my first thought) but as long as i had used this dvd many times i want to know if someone has similar experience while flashing fat liteon. Is that so hard to understand?

 

[Martin C]

i am asking whether it should be medium (which was my first thought) but as long as i had used this dvd many times i want to know if someone has similar experience while flashing fat liteon. Is that so hard to understand?

No - your process of elimination is sh*t. Is THAT hard to understand?

Regardless of the age/condition of a console, DVD drives are shipped lasers calibrated differently to one another. I've seen MANY cases where a flashed DVD drive was set really high and needed to be tweaked in order to read discs. There have been other cases where the drive wouldn't read anything other than originals.

So for starters, drop the fcuking attitude. You came here asking for help and you got an answer. It's either your disc or the drive. FACT.

Whether you want to take this advice is entirely up to you. Be an askhole all you like, but do it elsewhere. I'm sick to the back teeth of kiddies/noobies arguing with people here with a ton more experience than them, and then getting abusive when the answer isn't what they want to hear because CLEARLY they know better.

Guess what, Einstein? You posted here because you can't troubleshoot. I've already deduced the problem is more than likely the laser. Whether you like the reply or not, that's what needs attention.

See my quote in my sig? That's *you*.

Closed as answered.