Flashing red and 3 starts up

[E7_]

I have a V1.1 with the Xecuter 2.6 lite installed. I flashed it with the 5035 bios when the flash was done it shut down like it should have. now when I power the box up it tries to power up 2 times then on the 3rd it come on. with no video on the screen and the eject button flashs red at me. I have made sure the DO is still good. I can turn off the chip and it boots fine. Any help would be great. Thanks

 

[makaveli>the>don]

i had the same problem, i flashed with a different bios and it works now but when u first had the chip b4 u flashed it u shud get the blue flasshing screen , was this the case with u?

 

[islander223]

Can you still access Flashbios 3.03 on bank 2? What 5035 version did you flashed? SInce you have a v1.1 xbox, you should flash it with 5035_vOld_512k.bin...Boot on bank 2 and re-flash with this bios version. After flashing boot with your bank 1.

 

[fri3dric3boi]

i got same problem here i just went nuts on me how can i go

 

[fri3dric3boi]

back to the blue screen on bank one or u cant

 

[MKChampion]

did you flash with the appropriate version of the bios in accordance with your box version?

 

[jgreeno]

I was having the same problem until I noticed that within x2bm I was saving the bank instead of the image.. Open your bin file in x2bm that was used and make sure all banks are populated correctly.