sick360mods
BANNED
from looking they are the right way. double check the solder on the red wire to opposite side of the dvd
Flashing RED Lower right, been here before havnt we :(
- Thread starter roden
- Start date
- Status
Martin C
VIP Member
So in which case, the issue has to be with J2D2.1 and J2D2.2 (provided you can be 100% sure you've selected the right options in JTAG Tool and written Xellous correctly).
Not good news. These points go to the GPU via a couple of 1.5k resistors and if this isn't playing the game, the GPU itself is the fault.
Not good news. These points go to the GPU via a couple of 1.5k resistors and if this isn't playing the game, the GPU itself is the fault.
sick360mods
BANNED
for my sake just add a little solder to that point and double check that are writing xellous with the audio and dvd
Dont get that though, never ever had an issue with this console. Try creating an image and ill try it, if that dont work fck it ill turn it into a normal console, as it still works with the standard flash, funny thing is, i had this before with another console, same issue, and all of a sudden it works again.
I have uploaded my Xell.bin, dunno if you can check it at all.
I have uploaded my Xell.bin, dunno if you can check it at all.
Last edited:
A long shot, but maybe try re-wiring it to the original points (DB1F1 & RF board).
Could also glitch it...
Could also glitch it...
Last edited:
Martin C
VIP Member
What a lot of people don't get is these points are not used in retail use. They are DEV points so under any other circumstance, you wouldn't even know about it.
When you get 1 light, what's the secondary error code?
I dont get anything at all, just flashing bottom right and black screen.
By the way i just have the board on the desk, no dvd drive, fans or monitor cable plugged in, i know that does not make a difference. Also flashing XELL as i use HDMI only
By the way i just have the board on the desk, no dvd drive, fans or monitor cable plugged in, i know that does not make a difference. Also flashing XELL as i use HDMI only
Last edited:
Martin C
VIP Member
You'll get something.
Don't know what 'secondary error code' means? Google it
Don't bother with XeLL (HDMI only). No idea why anyone bothers with that as you sacrifice a LOT of functionality for the sake of HDMI output. stick to Xellous.
Im begining to wonder if i may have burned an efuse by accident or somthing
Meh cant be arsed with it, been on it all fin day, stuff it.
Meh cant be arsed with it, been on it all fin day, stuff it.
Last edited:
Martin C
VIP Member
If you removed R6T3, you've not burned anything.
The copy of the NAND you can write back which works, does that open ok in 360 Flash Tool? What's the CB version?
The copy of the NAND you can write back which works, does that open ok in 360 Flash Tool? What's the CB version?
Martin C
VIP Member
Ignore freeboot for now.
Xellous/XeLL is what you need to boot, which works regardless of what image you currently have, what CPU key you think is right etc.
If the ORIG1.bin on your FTP site flashes back to your console without a problem and works, then your CB is exploitable still.
I have to ask why the Cygnos was removed to begin with?
Xellous/XeLL is what you need to boot, which works regardless of what image you currently have, what CPU key you think is right etc.
If the ORIG1.bin on your FTP site flashes back to your console without a problem and works, then your CB is exploitable still.
I have to ask why the Cygnos was removed to begin with?
Right the cygnos was a bit of a crappy install, i lifted a few pads, and somehow managed to get it running, i knew it would not last forever however, as it was a real dodgy install.
All of a sudden, bout 6 months ago, it would not boot from the cygnos nand, i could write to it, but just nothing at all when selected. I kinda new this would happen.
Anyways few days back i tried to upgrade my dash using Bestpigs toolbox maker, which is what i always use for cygnos, it wrote to the xbox nand fine, but would not boot, same thing no power blaxk screen nothing?.
Tried about 30 times, then all of a sudden i could not write to any nand, just constant block errors, so i kinds figured after checking it and no go, it was time to get rid.
So my idea was to go down the nand x route, alot simpler, as i have another 2 already done the same.
But now this, all 3 original nands boot, but nothing else.
Anybody have a link to the ready made falcon xell bin that was on here, that always worked for me.
All of a sudden, bout 6 months ago, it would not boot from the cygnos nand, i could write to it, but just nothing at all when selected. I kinda new this would happen.
Anyways few days back i tried to upgrade my dash using Bestpigs toolbox maker, which is what i always use for cygnos, it wrote to the xbox nand fine, but would not boot, same thing no power blaxk screen nothing?.
Tried about 30 times, then all of a sudden i could not write to any nand, just constant block errors, so i kinds figured after checking it and no go, it was time to get rid.
So my idea was to go down the nand x route, alot simpler, as i have another 2 already done the same.
But now this, all 3 original nands boot, but nothing else.
Anybody have a link to the ready made falcon xell bin that was on here, that always worked for me.
Last edited:
Martin C
VIP Member
Did you get the secondary error code?
http://www.google.co.uk/search?hl=&...lient-ff&rlz=1B3GGGL_en-GBGB322GB322&ie=UTF-8
http://www.google.co.uk/search?hl=&...lient-ff&rlz=1B3GGGL_en-GBGB322GB322&ie=UTF-8
I cant be arsed with it, gotta press like 50 buttons lol
OK
Top Left
All 4
Then TOP 2 BOTTOM RIGHT x2 i think
X-
--
XX
XX
XX
-X
XX
-X
That was with the xell flashed, or freeboot.
Dunno fed up off to bed, catch ya tomorrow chaps
OK
Top Left
All 4
Then TOP 2 BOTTOM RIGHT x2 i think
X-
--
XX
XX
XX
-X
XX
-X
That was with the xell flashed, or freeboot.
Dunno fed up off to bed, catch ya tomorrow chaps
Last edited:
Martin C
VIP Member
Bloody hell, it's not rocket science.
Go to any of the top links after you google Xbox error codes and they explain it.
As you obviously either can't read, not willing to read or can't be bothered, your secondary code is 1033, which is effectively E79.
Since you obviously don't want to take the 5-10 minutes to read on how to interpret the lights flashing, I'll close this thread for now.
Go to any of the top links after you google Xbox error codes and they explain it.
As you obviously either can't read, not willing to read or can't be bothered, your secondary code is 1033, which is effectively E79.
Since you obviously don't want to take the 5-10 minutes to read on how to interpret the lights flashing, I'll close this thread for now.
- Status