flashing stock liteon 83850C problem

[dexjax]

hii guys i have a phat lite-on drive which is 83850C & i am on dashboard 2.0.13146.0, and on LT+2.0 i wanna upgrade it to LT+3.0

my question is how to flash it to stock i mean which file to select in target???

and i am not able to update it shows me some error!!!

plzzzzzzzzzzz help me out

 

[ReMix]

hii guys i have a phat lite-on drive which is 83850C & i am on dashboard 2.0.13146.0, and on LT+2.0 i wanna upgrade it to LT+3.0

my question is how to flash it to stock i mean which file to select in target???

and i am not able to update it shows me some error!!!

plzzzzzzzzzzz help me out

Orig 0251 fw. From the fw pack

In the case of a spelling error, I blame Tapatalk.

 

[dexjax]

but i can't get the keys it says "phat key failed"

 

[ReMix]

but i can't get the keys it says "phat key failed"

Explain your process.

In the case of a spelling error, I blame Tapatalk.

 

[dexjax]

i connected my drive using sata cable!!! and ck3i, in drive properties the drive was shown with details...

everything was f9, but when i hit the"phat key" it showed up a pop-up (it was for pointing probe on mpx01)

i pressed the power button on cable, pionted the probe, and then released the power button n lifted the probe...

in JF it showed something "sending"......

 

[ReMix]

the probe is likely not making a good connection!

clean off MPX01, and maybe press a little harder

 

[dexjax]

Orig 0251 fw. From the fw pack

In the case of a spelling error, I blame Tapatalk.

do i have to select the "Orig 0251 FW" file or the "83850C" file in the pre folder?????

 

[ReMix]

hii guys i have a phat lite-on drive which is 83850C & i am on dashboard 2.0.13146.0, and on LT+2.0 i wanna upgrade it to LT+3.0

right here you say you have a 0251 drive

and since you have dash 13146, that means you should not use pre-13146 because "pre" means "before"

 

[dexjax]

right here you say you have a 0251 drive

and since you have dash 13146, that means you should not use pre-13146 because "pre" means "before"

thankyou so much u helped me a lot, just one more question!!!

i also have another liteon drive 8th series phat one, it was an old LT FW, i tried to update it directly by a kinect game, now its stucked it give me error.

the problem is has old dashboard, starts with 12...something, to flash it to stock shall i use the orig file from stock or from pre???

 

[dexjax]

right here you say you have a 0251 drive

and since you have dash 13146, that means you should not use pre-13146 because "pre" means "before"

Whenever i try to write the stock it stucks and hangs up for a min and then it says write verify failed!! Plz tell me wit to do now???

 

[ReMix]

Whenever i try to write the stock it stucks and hangs up for a min and then it says write verify failed!! Plz tell me wit to do now???

just means you need to write the drive successfully

the problem is likely that you are working with a poor chipset

 

[dexjax]

just means you need to write the drive successfully

the problem is likely that you are working with an poor chipset

so how do i make it work???

 

[ReMix]

how are you connecting the drive to your computer?

explain your setup as thoroughly as you can

 

[dexjax]

how are you connecting the drive to your computer?

explain your setup as thoroughly as you can

it was usual connection, the drive was was connected to the pc motherboard by SATA cable. powered the ck3i by molex pc power supply,
and the usb cable was properly connected to pc (from ck3i) and it showed up in JF correctly....

 

[ReMix]

are you using the primary port of the motherboard?

your xbox drive should be in the lowest numbered SATA port

 

[dexjax]

are you using the primary port of the motherboard?

your xbox drive should be in the lowest numbered SATA port

thanks for tht idea, but i guess it was not primary because my HDD & DVD Rom was already connected the only space left was the lowest ports!!!