Hi all could do with a hand just got my X360 USB PRO through the door I brought a JTAGable 360 the dvd drive is stuck in mod b which is what Im persuming as green light keeps flashing on the front this is what I av been told anyway. I want to flash my xbox 360 so it can play games I have tried reading up about it and seen bits about Jungle flasher and LT 1.0 2.0 3.0 <--- Still dont know what that even is lol looked on youtube for some videos and managed to set it up properly driver is intalled etc. Not sure where to go from here would like to say a major thank you to everyone who has given me advice in this forum so far !!
Flashing Toshiba Samsung 007 I Think
- Thread starter Doodleschmidt
- Start date
there is no such thing as "stuck in mode b"
i assume you had a failed write?
if so send intro/device id to the port, press yes, the power cycle the drive
hopefully you get status 0x70 and be able to write firmware to it
i assume you had a failed write?
if so send intro/device id to the port, press yes, the power cycle the drive
hopefully you get status 0x70 and be able to write firmware to it
well when i brought the xbox 360 the green led keeps flashing I havent touched it and neither did the bloke before I know how to set my X360usb pro up but I don't know what to do from there
First of all get jungleflasher and in the documentation folder is the tutorial you should just follow that. If the power light is just flashing it means there is no drive connected. Maybe the drive is dead if no one has ever opened the xbox. You should open the box and connect the drive to your x360usb pro. You are going to need to power the drive so you can use your 360 or a ck3 (connectivity kit). Like I said get jungleflasher from the downloads sections and follow the tut it's pretty easy.
yeah I did that and followed it but still flashing 
maybe its the drive will give it another go tomz will let uno how i get on
maybe its the drive will give it another go tomz will let uno how i get on