Forgot to change bank switches...

[styan]

I accidentally flashed "x3 3294 v16" with the dip switches set to: off on off off off

does this mean I've flashed over FlashBIOS? can I re-flash flash bios into those banks, and remember to switch the switches next time...

If so, how do I do that?

 

[DJBOOBY]

have you got a v1.6 or a v1.6b xbox
if you have a v1.6 then your ok your backup will work power eject at sametime to get flashbios 3.0.1
if you have a v1.6b you will have to flash your backup bank with flashbios 3.0.3
did the flash go ok do you have working x3 bios if so ftp to your xbox place a folder called bios with the flashbios 3.0.3 file in it allso a good idea to put x3 bios as well
now reboot xbox into x3 bios goto bios tools and do flash backup rom do harddrive flash find bios folder then flashbios flash the backup then try power eject at same time
full guide of x3 below

 

[styan]

have you got a v1.6 or a v1.6b xbox

Sorry, completley forgot to mention that, its a 1.6b

I went ahead and updated the backup, no problems, its booting into the backup just fine. (and X3 3294)

Thanks for your help!!