Forgotten how to do the update cant find cpu/dvd key

[gandalf1972]

Hi guys,

I am complete donkey and forgot where I stored my old cpu key.

I have a RGH v1
I have FSD v2.2 rev 725 and XEX menu
I have the flashdmp file from flash360
I dont seem to have xell so cant use the eject tray.
In homebrew I have flash360, freestyle 3, nxe2god, xexmenu and xm360
Console is a trinity.

Its been a while since I updated the dash currently its on 2.0.16203.0

I am trying to update my dash to latest version but stuck on filling out xebuild 2.0 without the cpu key. I am not sure if I will come up against any other obsticle but any advice and help would be much appreciated.

Thanks in advance

 

[Joo C]

If it's a Trinity it can't be RGH1. Use Dashlaunch to view the key, dump the nand with nandflasher update in JRunner to the latest dash and write with nandflasher

 

[nightmare0]

Do you have any nand? Try load that in j-runner. It should show you a cpu key. But it is very easy to update. Download for example simple nand flasher. Run it in fsd or whatever. Dump your nand to usb key. Open dump in j-runner, there will be all information also cpu key. Simply rebuild new image, copy to simple nand flasher and again in fsd flash with new nand. Simple

 

[gandalf1972]

Hi Guys,

Thanks for the help, ok I managed to update dashlaunch that I had and noticed that I had downloaded xell so from there I was able to get my cpu / dvd key and then updated using xebuild2.0 and then used flash360 to write nand and then went to flash 360 and applied the update dash on the xbox 360. Thought I would leave this on here in case it helps someone else. Thanks for all help guys it was much appreciated.

 

[johnnyblackout]

For future reference. You should just use J-Runner for updates. It has a nice and painless update feature, it even uses your LAN, so you all you have to do is plug an Ethernet cable into your router.