my chip has just starting acting up.. when i hold power button to turn off mod its frags :-\ and sometimes when i start it up with chip on it frags :-\ is that the d0 ?
frag
- Thread starter Jango
- Start date
Jungleflasher Can't detect my BenQ drive.
Hi, new here not sure if this is in the rite place..
So my problem is Junleflasher doesn't detect my BenQ drive..I have "F2'ed" at start up and the computer seems to read the drive fine but when i open Jungleflasher and check to ports it finds noting..
Info you may/may not need
Windows XP
Intel(R) ICH8R/DO/DH SATA RAID Controllers
BenQ Drive VAD6038
FW ver 64930C
Using the xbox not CK3 or whatever it is
Any help would be great..
Thanks in advance..
Hi, new here not sure if this is in the rite place..
So my problem is Junleflasher doesn't detect my BenQ drive..I have "F2'ed" at start up and the computer seems to read the drive fine but when i open Jungleflasher and check to ports it finds noting..
Info you may/may not need
Windows XP
Intel(R) ICH8R/DO/DH SATA RAID Controllers
BenQ Drive VAD6038
FW ver 64930C
Using the xbox not CK3 or whatever it is
Any help would be great..
Thanks in advance..
Re: Jungleflasher Can't detect my BenQ drive.
ensure sata is not set to ACHI! use primary sata port
ensure sata is not set to ACHI! use primary sata port
Re: Jungleflasher Can't detect my BenQ drive.
Thanks for the reply..
Do u no how to do that or check that is the setting??i really don't have a clue?
Thanks for the reply..
Do u no how to do that or check that is the setting??i really don't have a clue?
Re: Jungleflasher Can't detect my BenQ drive.
Thanks for the reply..
Do u no how to do that or check that is the setting??i really don't have a clue?
Thanks for the reply..
Do u no how to do that or check that is the setting??i really don't have a clue?
Re: Jungleflasher Can't detect my BenQ drive.
Thanks for the reply..
Do u no how to do that or check that is the setting??i really don't have a clue?
Thanks for the reply..
Do u no how to do that or check that is the setting??i really don't have a clue?
Re: Jungleflasher Can't detect my BenQ drive.
You have no idea how long I sat trying to troubleshoot my homemade CK adapter only to find out when I used the pri port it worked!
+1braveheart43 said:
You have no idea how long I sat trying to troubleshoot my homemade CK adapter only to find out when I used the pri port it worked!
Re: Jungleflasher Can't detect my BenQ drive.
You have no idea how long I sat trying to troubleshoot my homemade CK adapter only to find out when I used the pri port it worked!
+1braveheart43 said:
You have no idea how long I sat trying to troubleshoot my homemade CK adapter only to find out when I used the pri port it worked!
Re: Jungleflasher Can't detect my BenQ drive.
Ok so good chance this could be my problem.
Now how do i now if i'm using the primary port or not..i see 4 sata ports on my motherboard one is blue with a bule sata cable which seems to lead to my harddrive and the other has my sata cable running to the BenQ drive and the other two arn't in use..
Ok so good chance this could be my problem.
Now how do i now if i'm using the primary port or not..i see 4 sata ports on my motherboard one is blue with a bule sata cable which seems to lead to my harddrive and the other has my sata cable running to the BenQ drive and the other two arn't in use..
Re: Jungleflasher Can't detect my BenQ drive.
Ok so good chance this could be my problem.
Now how do i now if i'm using the primary port or not..i see 4 sata ports on my motherboard one is blue with a bule sata cable which seems to lead to my harddrive and the other has my sata cable running to the BenQ drive and the other two arn't in use..
Ok so good chance this could be my problem.
Now how do i now if i'm using the primary port or not..i see 4 sata ports on my motherboard one is blue with a bule sata cable which seems to lead to my harddrive and the other has my sata cable running to the BenQ drive and the other two arn't in use..
Re: Jungleflasher Can't detect my BenQ drive.
open up JF - on the dvdkey tab you will see the sata channel and position.
make sure the dvd drive is setup on pri. I've got mine on master as well.
open up JF - on the dvdkey tab you will see the sata channel and position.
make sure the dvd drive is setup on pri. I've got mine on master as well.
Re: Jungleflasher Can't detect my BenQ drive.
open up JF - on the dvdkey tab you will see the sata channel and position.
make sure the dvd drive is setup on pri. I've got mine on master as well.
open up JF - on the dvdkey tab you will see the sata channel and position.
make sure the dvd drive is setup on pri. I've got mine on master as well.
Re: Jungleflasher Can't detect my BenQ drive.
ok i have it open and there is 5 I/O ports
Channel is primary and position is master?
Still not finding any drivers..
ok i have it open and there is 5 I/O ports
Channel is primary and position is master?
Still not finding any drivers..
Re: Jungleflasher Can't detect my BenQ drive.
ok i have it open and there is 5 I/O ports
Channel is primary and position is master?
Still not finding any drivers..
ok i have it open and there is 5 I/O ports
Channel is primary and position is master?
Still not finding any drivers..
Re: Jungleflasher Can't detect my BenQ drive.
Hi Jay,
Sorry to ask this mate but is portio/net framework installed?
Hi Jay,
Sorry to ask this mate but is portio/net framework installed?
Re: Jungleflasher Can't detect my BenQ drive.
Hi Jay,
Sorry to ask this mate but is portio/net framework installed?
Hi Jay,
Sorry to ask this mate but is portio/net framework installed?
Re: Jungleflasher Can't detect my BenQ drive.
Hey,
Yes .net framework 1.1 is in my admin tools and jungleflasher reads:
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 0 Com Ports.
Found 6 windows drives C: D: F: G: H: I:
So i guess that means portio32 is installed?
Hey,
Yes .net framework 1.1 is in my admin tools and jungleflasher reads:
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 0 Com Ports.
Found 6 windows drives C: D: F: G: H: I:
So i guess that means portio32 is installed?
Re: Jungleflasher Can't detect my BenQ drive.
Hey,
Yes .net framework 1.1 is in my admin tools and jungleflasher reads:
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 0 Com Ports.
Found 6 windows drives C: D: F: G: H: I:
So i guess that means portio32 is installed?
Hey,
Yes .net framework 1.1 is in my admin tools and jungleflasher reads:
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 0 Com Ports.
Found 6 windows drives C: D: F: G: H: I:
So i guess that means portio32 is installed?
Re: Jungleflasher Can't detect my BenQ drive.
Anyone have any ideas whats wrong??Or a Different forum i could go to that would know more about jungleflasher??
Anyone have any ideas whats wrong??Or a Different forum i could go to that would know more about jungleflasher??
Re: Jungleflasher Can't detect my BenQ drive.
Anyone have any ideas whats wrong??Or a Different forum i could go to that would know more about jungleflasher??
Anyone have any ideas whats wrong??Or a Different forum i could go to that would know more about jungleflasher??