Hi
Anyone got any ideas on how to fix this?
Ive got a 1.6 Box and an Xecuter 2.6 chip using a xapter solderless adapter. All the connections were fine and it booted to the flash screen. Heres the problem, I picked up the wrong bios disk, and flashed it with the 24981 version by accident not the 5035. Now the xbox powers up twice then frags red/green
I've checked the chip on another box which is a 1.4 and it works fine. Ive also tried hotswapping the other chip from the 1.4 board, and it still frags.
And I have tried changing from bank 1 to 2
Someone mentioned elsewhere that I can reflash the chip on another board, however the only other board I have access to at the moment is a 1.1 if I reflash the chip on this board with the correct bios, am I likely to screw this machine up?
Anyone got any ideas on how to fix this?
Ive got a 1.6 Box and an Xecuter 2.6 chip using a xapter solderless adapter. All the connections were fine and it booted to the flash screen. Heres the problem, I picked up the wrong bios disk, and flashed it with the 24981 version by accident not the 5035. Now the xbox powers up twice then frags red/green
I've checked the chip on another box which is a 1.4 and it works fine. Ive also tried hotswapping the other chip from the 1.4 board, and it still frags.
And I have tried changing from bank 1 to 2
Someone mentioned elsewhere that I can reflash the chip on another board, however the only other board I have access to at the moment is a 1.1 if I reflash the chip on this board with the correct bios, am I likely to screw this machine up?